It is particularly suitable to control counter meters of electricity, water and gas.

The body is completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

(*) Anodising is a non- spontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion.

TECHNICAL DRAWING

SIZE
Diameter: 1,5 mm (0″ 1/16″)
Lenght: 180 mm (7″ 3/32″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKAGING
500 pcs per carton
Carton size: 30x28x15 cm (11″ 13/16″ x 11″ 1/32″ x 5″ 29/32″)
Carton weight: 8,6 kg (18lb)

The post Cable Seal 1.5×180 mm appeared first on LeghornGroup.

VOID TAMPER EVIDENT LABEL of LeghornGroup is specifically designed to provide evidence of unauthorised tampering. LeghornGroup VOID LABEL can be applied both on smooth and rough surfaces. Once the Void tamper evident security label has been removed from the surface, it leaves a film behind showing a void/open message as evidence of tampering.

Numbering

These labels are supplied in different sizes and have all a progressive numbering.
The provide a high level of security by leaving a void message on the surface they have been applied to.
They can be used for different purposes that require a high level of security.

Where to apply labels

Void tamper evident security labels are widely used by hardware and mechanical objects manufacturers. In addition, also repair workshop and assistance laboratories use them. These labels have also a great importance for pharmaceutical industry, both for sealing special drug boxes and for laboratory test tubes.

In the transport field, these labels are used to seal boxes.
Void tamper evident labels are also used to ensure products authenticity.
An intact void security label guarantees that the product to which it has been applied to has not been tampered with.
It is also recommended to use a progressive numbering and note where the label has been applied to.

Examples of realisation

LeghornGroup can satisfy any customer’s requirement, from labels size, colours and shake. Void tamper evident security labels can be printed with logo, barcode and progressive numbering. LeghornGroup technicians are always at your disposal for any request concerning VOID security labels.

STANDARD SIZES
20×11 mm (25/32″×7/16″)
30×20 mm (1″ 3/16″×25/32)
40×20 mm (1″ 37/64×25/32″)
50×20 mm (1″ 31/32″×25/32″)
60×30 mm (2″ 23/64″×1″ 3/16″)
80×30 mm (3″ 5/32″×1″ 3/16″)
80×40 mm (3″ 5/32″×1″ 37/64″)
100×40 mm (3″ 15/16″×1″ 37/64)
120×50 mm (4″ 23/32″×1″ 31/32″)
150×75 mm (5″ 29/32″×2″ 61/64″)
200×80 mm (7″ 7/8″×3″ 5/32″)

MATERIAL
Paper
Polyetilene

SEQUENTIAL NUMBERING AND CUSTOMISATION
– INK PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Logos available upon request

The post Void tamper evident label with residue appeared first on LeghornGroup.