UHF/HF/NFC RFID meter seal TWIST SEAL

nisfoian — Fri, 13 Mar 2020 10:30:41 +0000

RFID meter seal TWIST SEAL is a security seal made of very strong plastic material. The completely transparent outer casing allows to check the correct locking system. It is equipped with RFID UHF inlay, compatible with ISO18000-6 and has a unique code which is impossible to clone (available also in HF/NFC operating frequency) since it is embedded in the seal.

LeghornGroup produces different models of seals for gas, water and electrical meters.
In particular, LeghornGroup was among the first companies to produce a self-locking wire seal more than 30 years ago. The evolution of the standard Twist seal is our Twistseal RFID UHF.

HOW TO USE IT
Insert the cable in one of the two holes on the body of the seal, paying attention to insert the same cable in the corresponding hole in the inner plastic cylinder.

To close it, turn the handle of the seal 360°. Once closed, it is advisable to snap off the handle. It is impossible to tamper the seal once it is secured.

TECHNICAL DRAWING

RFID UHF TWIST SEAL

Protocol: EPC Class 1 Gen2 ISO/IEC 18000-6C
Chip: ALIEN 9620
Memory: EEPROM
Operating frequency: 860 – 960 MHz – UHF Global
Protection: IP65
Operating temperature: -20°C a +80°C
Storage temperature: -20°C a +80°C
Tag size: 15×30 mm
Resistance to critical external agents
Typical reading range: from 5 to 15 cm
(depending on the type of reader used)

Available also in the following versions: RFID HF ISO 15693, HF ISO 14443A MIFARE, HF NFC NTAG

COLORS & CUSTOMIZATIONS
Red – Yellow – Blue – Green – White – Black – Orange – Light blue – Grey – Brown – Lilac – Silver – Gold

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINT
– Sequenced numbering up to 15 digits.
– Customised up to 20 characters on one line
– Logo available upon request
– Same EPC code than the outer laser marking
– Available in different RFID operating frequency

PACKING:
Quantity per carton 500 seals
Carton size: 56×24×46 H cm
Carton weight: 3/4 kg

The post UHF/HF/NFC RFID meter seal TWIST SEAL appeared first on LeghornGroup.

Wire seal for counters Connectionlock

v.anei — Sat, 29 Feb 2020 14:56:34 +0000

Connectionlock is a simple and effective system to protect the pipe- fittings of meters. The transparent plastic allows visual control of integrity of the fitting itself.
Connectionlock works like a seal because it consists in two parts fitting permanently one into the other. There is no way to remove Connectionlock without breaking it. Once positioned on the pipe-fitting, it is possible to ensure it with a consequentially numbered wire seal. (TWISTSEAL).
By this way maximum security is achieved.

TECHNICAL DRAWING

SIZE
ART 311 : L: 26mm (1” 1/32”) R1: 16mm (5/8”) R2: 22mm (55/64”)
Fit to DN20 (3/4”) meters
–
ART 312 : L: 30mm (1” 3/16”) R1: 16mm (5/8″) R2: 24,5mm (31/32”)
Fit to DN20 (3/4”) bold fittings
–
ART 313 : L: 28mm (1” 7/64”) R1: 19mm (3/4”) R2: 27mm (1” 1/16”)
Fit to DN25 (1”) meters
–
ART 314 : L: 38mm (1” 1/2”) R1: 29mm (1” 9/64”) R2: 39mm (1” 17/32”)
Fit to DN40 (1” 1/2”) meters

MATERIAL
Polycarbonate (PC)

COLOURS

MARKING OPTIONS
– INK JET PRINT
– Sequenced numbering up to 6 digits.(NOT NECESSARY)
– Customised up to 20 characters on one line
– Logos available upon request
– For special orders, logo printing in relief

PACKAGING

Art: 311
Carton with 500 seals
Carton dimensions: 40x60x35 cm (15” 3/4” x 23” 5/8” x 13” 25/32”)
Carton weight: 13 kgs (28 lb)

Art: 312
Carton with 500 seals
Carton dimensions: 40x60x38 cm (15” 3/4” x 23” 5/8” x 14” 61/64”)
Carton weight: 13 kgs (28 lb)

Art: 313
Carton with 500 seals
Carton dimensions: 40x60x35 cm (15” 3/4” x 23” 5/8” x 13” 25/32”)
Carton weight: 14 kgs (30 lb)

Art: 314
Carton with 250 seals
Carton dimensions: 40x60x35 cm (15” 3/4” x 23” 5/8” x 13” 25/32”)
Carton weight: 9 kgs (19 lb)

The post Wire seal for counters Connectionlock appeared first on LeghornGroup.

Meter seals - LeghornGroup

UHF/HF/NFC RFID meter seal TWIST SEAL

Wire seal for counters Connectionlock