Real time alerting and recording of any access to the goods transported or stored: opening, closing or tampering (device ID, type of event, date and time).
It has a  long operation time thanks to its long-lasting battery, rechargeable via USB and easy to replace by the user.
GPS tracking for location, control, geofencing.

eLOCK GOLD is an advanced electronic reusable security lock, to control position and status of trucks and containers, either from fixed station or from mobile devices (smart phone and tablet).

eLOCK GOLD sends an SMS  alert any time the lock registers an event of opening/closure, tampering attempt (e.g. the cable is being cut), battery is low. Alert message includes ID, event type, GPS coordinates for the place the event took place at, and time stamp.

Designed as evolution of LeghornGroup e-LOCK GOLD product, which is on the market since more than 5 years, offers an improved user experience – in addition to the existing model ability to obtain logistic identification information in real time.

• Completely renewed plastic case to strengthen its resistance to mechanical shocks, dust and water (IP66 equivalent).
• Lithium battery, rechargeable via USB, of longer duration and replaceable by the user.
• Facilitated insertion of SIM card.
• Possibility to check the device functionalities thanks to the use of three front and multicoloured LEDs which report the user the battery status and GPS/GPRS communications.
• The employment of a last generation GPS module that allows to consistently reduce warm up periods and detect/track indoor positions (ex. in a warehouse).
• Possibility to download the recorded event log (more than 3500) from the device memory, throughout USB interface.
• Easier connection to PC.

How does eLOCK GOLD work?

Thanks to its advanced technical features, eLOCK GOLD can send an SMS to a set of selected numbers or communicate via web platform  if an event occurs and allows you to enable features of:

• MONITORING, thanks to its ability to communicate in real-time with IT systems for logistics and transport, it informs about the complete data on fleets and individual vehicles
• ANALYSIS of the data for the entire fleet relating to individual drivers, with the possibility of intervention and planning of activities..
• CONTROL, through real-time access to data on vehicles and drivers, and to the position marked on the map by using GPS tracking.

Used together a web-based èlatform for fleet tracking and management, it is a powerful tool to monitor vehicles and goods.

Technical specifications

• Dimension: 106,6×156,1×44,5 mm (4″ 13/64″×6″ 9/64″×1″ 3/4″)
• Material: High-resistant polycarbonate
• Power supply: 5 VDC
• Working voltage: 3,3 VDC
• Average current: 80 mA
• Current in standby mode: 15 uA
• Internal battery: 4,2 VDC 6600 mAh – Lithium battery, rechargeable via USB
• Working hours
• Two data per day: 4 years
• Ten data per day: 1 years
• Continuous every 10 minutes : 10 days
• Stand by > 10 years
• CPU Microcontroller System on Chip Cypress ARM Cortex-M3
• GSM GSM/GPRS module : Quectel M95
• Frequency band Quad-band: GSM850, EGSM900, DCS1800, PCS1900 MHz
• Antenna Internal antenna
• GPS Compact GNSS Module, U-blox SAM-M8Q-0-10 GPS + GLONASS
• Positioning accuracy: 2,5 m (8 ft)
• GPS sensitivity 165dBm@Tracking, -158dBm@Acquisition, -146dBm@ColdStart , -155dBm@HotStart
• Positioning time: Cold Start <26s; Hot Start <1s
• Satellite receiving channel: 72 channels
• Antenna embedded patch antenna
• LED indicator: for GSM / GPS status and battery charge
• Operating temperature: -15°C to 60°C
• Storage temperature: -20°C to 60°C
• Cable material insulated plastics, anti wringing, anti cutter
• Cable length: 75 cm (29″ 17/32″)
• Closure pin spring blocking system
• Security Possibility to block the system by using seals
• Log memory Last 3650 data recorded
• Data program /Data download/Firmware upgrade: via USB

 Information for customers to have access to our after-sales service and warranty conditions

The post Reusable electronic security seal eLOCK GOLD appeared first on LeghornGroup.

High Security Cable Seal ISO 17712 with 3,5 mm of cable diameter is the best trade-off between security degree and versatility of usage.

It is an adjustable seal and can be used in many different conditions, in particular in any application to protect cargos during shipping and intermodal freight.

CABLESEAL 3,5×250mm has the body completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

This is a High Security Seal compliant with requirements impose by ISO 17712:2013.

(*) Anodising is a non- spontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion.

TECHNICAL DRAWING

SIZE
Diameter: 3,5 mm (0″ 9/64″)
Length: 250 mm (9″ 27/32″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS
(Photos and drawings are indicative.)

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKING
500 pcs per carton
Carton size: 36×29×19 cm (14″ 11/64″ × 11″ 27/64″ × 7″ 31/64″)
Carton weight: 19.2 kg (42.3 lbs)

The post High Security Cable Seal 3.5×250 mm ISO 17712 appeared first on LeghornGroup.

It is particularly suitable to lock valves in the industry sector or trucks and oil tankers in transports.

The body is completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

(*) Anodising is a non- spontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion.

TECHNICAL DRAWING

SIZE
Diameter: 2,5 mm (0″ 3/32″)
Lenght: 200 mm (7″ 7/8″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKAGING
500 pcs per carton
Carton size: 30×28×15 cm (11″ 13/16″×11″ 1/32″×5″ 29/32″)
Carton weight: 9,5 kg (20 lb)

The post Cable seal 2.5×200 mm appeared first on LeghornGroup.

Metal fixed length strip seals  STRAPSEAL offer an extreme security and high visibility even from longer distance and are easy to handle. Our STRAPSEAL is also suitable for truck and trailer tarpaulins and swap-bodies.

TECHNICAL DRAWING

SIZE
Width: 7 mm (0″ 9/32″)
Length: 210 mm (8″ 17/64″)

It can be manufactured in various length from  10 to 115 cm.

MATERIAL
Steel with plastic head

COLORS & CUSTOMIZATIONS

MARKING
– HOT PRINT
– Progressive numbering up to 6 digits
– Customization up to 20 characters
– Logo available upon request

PACKAGING
1000 per carton
Carton size: 29x20x15 cm (11″ 27/64″ x 7″ 7/8″ x 5″ 29/32″)
Carton weight: 7 kg (15lb)

The post Metal strip seal STRAP SEAL appeared first on LeghornGroup.

With billions of containers in circulation in world (approx 200 million TEU), the main issue of those who must transport them is knowing how to locate their container and or course the goods that are being transported.

ISO “International Organization for Standardization ” has established a unique identification code for every single container.
This alphanumerical code has 11 figures and is known as the “CODICE BIC” by the “BUREAU INTERNATIONAL DES CONTAINERS” Paris.

EXAMPLE

From the code we can identify:

The PROPRIETER
The  CONTAINER NUMBER
A CHECK DIGIT

TTNU 302512   4

The proprietor: 4 letters
[fourth position: U,J,Z for worldwide traffic] Service number(6 digits, proprietors choice)
+ Check digit number.

The owner code, also known as Alpha Prefix, is only be issued for the whole world by BIC, while the service number is determined independently by the owner and the self-checking digit is automatically calculated by an algorithm starting from the previous ten letters and numbers.
The marking system of each container is normally performed using the letters and numbers, from the self adhesive plastic material that are applied on each side of the container to make sure it can be visually identified.
The control of each individual container is done visually by a human being that brings it back manually on the relevant documents.

A REGULARIZED CONTAINER, CAN HELP REGULARIZE OTHERSI

This is the control system largely used for checking containers: but it has serious deficiencies: Mainly the possibility of duplicating the same code on the  self adhesive labels and applying it to more than one container.

As a result, as if by magic, an inspected and regularized container, automatically checks other containers “Homonyms” uninspected and therefore illegal.

The danger to the State and economical nature (is millions of dollars for every single container) also relative to the security (dangerous goods, arms explosives, chemical or biological hazards).

HUMAN ERROR

Human error when reading the container ID and documents is around 12%.
Even if the error in unintentional, the economical damage is still thousands of dollars for the parties involved – both private companies and the Customs who handle the inspections. The time required to read the ID code, write it down on the relative document and then check this is lengthy.

… The time taken has been calculated at between one to three minutes for each single container, which, if multiplied by  hundreds of thousands of containers handled each year, gives an impressive figure of working hours that are used up to identify a container. The cost is millions of dollars.

ALL THIS CAN  COME TO AN END IMMEDIATELY using an RFID tag which visually states the number and identification code of the container, but  CANNOT BE MODIFIED ON AN ELECTRONIC LEVEL .

RFID  stands for “Radio-Frequency Identification”

RFID ELECTRONIC IDENTIFICATION

Easy to apply RFID plaque “TAGETE ” can be immediately used in any terminal equipped with doors with RFID readers and interfaces directly with any management system.

It can be read from several meters away and reduces human error to zero.

The placque is also fitted with a unique serial number and a user memory that can store info and data according to the requirement.

The  RFID tags within our

“TAGETE*”

CONTAINER RFID  E-LABEL  are of the ISO standard : ISOIEC 18000-6C EPC CLASS1 GEN 2.

MADE IN ITALY

The TAG RFID is uniquely numbered, cannot be modified in any way as the numbering is burned onto the chip’s memory.

This numbering on the chip is in turn linked to the container ID number, and  together  they ensure the identification of the container which  can by no means repeated or copied.

The RFID tag can store the following basic information:

• Movement date
• Type of operation
• User who carried out the operation
• Container number
• Possible to add a further security code

The advantages of this model help raise productivity rate of container identification and container entrance/exit within the port.

Furthermore, as it is unique, the RFID  tag cannot be duplicated electronically, thus the history of the container movement is available for any kind of security check.

Our patented product (TAGETE*) can offer the above functions, without compromising the working order of an RFID seal in the event that it too is applied to the container.

Together, these RFID seals, provide an electronic control of the container that offers a level of security yet to be surpassed.

TECHICAL DATA OF THE READER

EPR  FAST LANE
– Operating frequency: 865-869 MHz, ETSI EN 302-208
– Protocol: ISO 18000-6C; EPC Class1 Gen2;
– Antenna: Special Embededd antenna system;
– RF Power: Programmable via software +32.5 dBm (fino a  +30dBm se utilizzo di POE)
– Reader power supply: POE IEEE802.3 o 24 Vdc, 0,8A tramite alimentatore esterno;
– Alimentazione di rete: 100-240 Vac, 50/60Hz
– Communication port: Ethernet 10/100 Base-T Ethernet (RJ45);
– Sensors:  for trigger signal
– Address Configuration: DHCP, Static, LLA + mDNS
– Enviromental Conditions:
– Operating Temperature: -20°C + 50°C
– Storage Temperature: -20 °C +60°C
– Size for base module: 350 x 560 x 270 mm
– Weight: 4000 g
– Certification: CE (FCC can also be supplied)
– Housing: Alluminio anodizzato & Polietilene
– Protezione IP:  IP55

Optional Kits
Kit TEMP:  kit operating temperature from – 40°C a + 75°C
Kit LED Alert: kit  for led alarm and buzzer
Kit I/O interface:  kit for signel interfacing I/O with external devices

MOBILE  READER EPR GUN

– Product: EPR UHF GUN
– Dimensions: 146 x 74 x 126 mm
– Weight: 330g – 550g (depending on options)
– Processor/Memory: Marvel pX A270 520 MHz – Marvel PX A320 820 MHz (option) – 128 MB RAM/256MB ROM
– Operating system: Windows CE 5.0.
– Display: 3.5 TFT LCD256K color LCD QVGA resolution (240Wx320L) with backlight
– Battery performance: 3000 mAh Lithium Polymer main Battery Pack for PDA
4400 mAh Lithium Polymer main Battery Pack for UHF unit 100 mAh Lithium Polymer Back-up Battery
– Interface: Keyboard buttons and Touch screen, numeric key Hands free Speaker, Microphone/Receiver Headset Port
– Environment: -20°C ….. 50° C  – 1.5 meters to polished concrete – IP54 sealing
– Standard communications: USB 1.1 Bluetooth WLAN 802 11b/g
– Optional communications: CDMA EVDO or 2000 1X GSM/GPRS/EDGE, WCDMA
– Exposition Slot: 1 Micro SD Slot. 1 SIM Slot
– RFID Unit: UHF- ISO 18000-6 C (866-954MHz)
– Options: 1D Laser Scanner or 2D Barcode Imager – 1.3 Megapixel fixed focus camera with flash – GPS Receiver
Single Slot Cradle – 4 Slot Cradle – Vehicle Cradle

CARACHTERISTICS
– Supports ISO18000-6 C (inc. C1G2)
– 2m+ of reading distance
– small/ light/ easy to use
– Windows CE 5.0
– USB + Bluetooth + WiFi
– Touchscreen
– Battery 3000 + 4400mAh (long life)
– CE approved
– IP54

The post TAGETE appeared first on LeghornGroup.

It is suitable for different means of transport:

• Tank truck
• Sheeted vehicles
• Trailers
• Container

It is also suitable for sealing big bags or security bags. The lateral loop can be useful for any tag. If a long version is required, we can suggest the LONG SEAL that has a tail length of 420mm.

We suggest to close the seal the closest possible to achieve the highest possible level of security.

TECHNICAL DRAWING

SIZE
Diameter: 6 mm (15/64”)
Length: 294 mm (11” 37/64”)
Label: 26 x 66 mm (1” 1/32” x 2” 19/32”)

MATERIAL
Copolymer propylene

COLOURS & CUSTOMIZATIONS

MARKING
– Laser marking
– Sequentially numbering (max 15 digits)
– Barcode possibility
– Customisation up to 20 digits on a line
– Logo printing upon customer’s request
– For special orders embossed logo printing

PACKAGING
Cartons of 1000 seals – in strips of 10 pieces
Carton dimensions: 56 x 39 x 21 cm (22” 3/64” x 15” 23/64” x 8” 17/64”)
Carton weight: 4 kg (8 lb)

The post Adjustable length plastic seals SIMPLE SEAL 6×294 mm appeared first on LeghornGroup.

JANUS-GATE: RFID UHF GATE  is made up of a reader and two antenna that are capable of reading the RFID e-seals regardless of their position or condition, distinguishing even between two containers that pass through simultaneously in adjacent lanes.

1. RFID e-SEALS applied on the upper handles of the container
2. RFID e-SEALS applied on the lower handles of the container
3. RFID e-SEALS applied on the left or right hand side of the container
4. RFID e-SEALS applied to containers positioned  with the doors towards the lorry’s cab
5. RFID e-SEALS applied with the doors facing the opposite end  of the lorry’s cab

JANUS-GATE: UHF RFID  GATE

Is an RFID UHF  – ISO 18000-6 (EPC Global) able to read all types of RFID  seals (from any manufacturer).

For every lane  the JANUS-GATE: UHF RFID  GATE can read up to  2 RFID e-SEALS on the container that passes through it.

Every lane that must be checked  is managed by an  EPR FAST LANE STATION.

Main technical features

JANUS-GATE: UHF RFID  GATE

• Advanced Detection Algorithm , for the accurate and efficient reading of the seals that pass through the gate
• Lane Detection Firmware for identifying and reading of seals in adjacent lanes
• Auto setting capability, for improving the readings regardless of the environmental conditions
• Fast Mounting, for easy servicing set up and installation
• Fault Tolerance Management System , for 24 hour continuity and service operations (optional)

Main hardware Characteristics

“THE JANUS-GATE: RFID GATE PASSIVE SYSTEM UHF”

Management software: JANUS-GATE: RFID UHF  GATE

The  Management Software allows the RFID gates to be monitored and operated easily by the control staff. The main pieces of data that the system can manage are:

• serial number of theRFID e-seals
• identification of the gate
• identification of the lane
• date and time of the reading
• number and reading of each individualRFID e-seals
• sequential reading where a container is sealed with two e-seals or where there are two containers on the same trailer
• the state of the security seal (e.g. TAMPERED / NOT TAMPERED) valid for the containers fitted with the RFID NEPTUNE SEAL Anti tamper with special software .(optional)
• generation of file log

The Management Software for JANUS-GATE: RFID UHF GATE can be installed on any  PC or SERVER that uses WINDOWS.To connect the PC with the Management Software and  the  JANUS-GATE: RFID UHF GATE  a LAN network Ethernet TCP/IP connection is required .

The JANUS-GATE: RFID UHF GATE can also be integrated with existing IT systems and structures.

The post Janus Gate appeared first on LeghornGroup.