It’s the first RFID bolt seal – compliant with ISO 17712 technical standards – available on the market that is able to provide its status information, UNLOCKED,  LOCKED OR TAMPERED, which is stored in the RFID chip. For this reason, the product has been named “three-state“.

The outer polypropylene plastic housing of the seal – customizable with mark and numbering on request – embeds an unique and latest generation of electronic chip, that has its own univocal coding, which cannot be replicated.

This allows for secure and reliable automatic identification of the seal applied to the container or vehicle.

TECHNICAL DRAWING

SOTER SEAL

• Has univocal ID code and read/write user memory capabilities.
• It offers at the same time the immediate and accurate seal identification and the status of the seal i.e. unlocked/locked and evidence of tamper occurred, if any.
• It is an ideal solution for guaranteeing cargo security and tamper evidence along the shipping and supply chain.

COLORS & CUSTOMIZATIONS
(Photos and drawings are indicative.)

RADIO FREQUENCY SPECIFICATION

• Frequency: 860 – 960 MHz
• Reference RF Standard: EPC Class 1 Gen2 / ISO/IEC 18000-6C
• Technology: Passive
• RFID IC: NXP G2iM+
• User read / write memory: up to 640 bit
• Memory size: from128 bit up to 448 bit of EPC memory
• TID (Tag IDentifier): 96 bit, including 48-bit of univocal progressive numbering factory locked; 112 bit user TID memory
• Password protected: yes
• Tamper detection: yes – THREE STATES DETECTION
• Read/Write cycle: 10000
• Data retention: 20 years

PERFORMANCE

• Reading distance by handheld reader: 2 m (6’6” 47/64”) (depending on reader)
• Reading distance at gate reader: 5 m (16′ 4″ 27/32”) (depending on reader)
• Quality: 100% performance tested)

MECHANICAL SPECIFICATION

• IP Protection: IP65
• Operating temperature: – 20°C / + 55°C
• Storage temperature: – 30°C / + 80°C
• ISO 17712:2013 Clauses 4, 5 and 6: yes
• Material: carbonitrured steel + polypropylene in accordance with Restriction of Hazardous Substances (RoHS), European Directive 2002/EC.

SIZE

• Electronic flag: 48×117×4 mm (1”x 7/8”×4” 19/32”×5/32”)
• Metallic pin length: 67 mm (2″5/8”)
• Metallic pin diameter: 8 mm ( 3/16”)
• Bolt size: 56×63×26 mm (2″ 13/64×2″ 31/64”×1″ 1/32”)
• Weight: 114 g

The post Bolt lock UHF RFID three-state e-seal SOTER SEAL appeared first on LeghornGroup.

NEPTUNE SEAL is a bolt seal, compliant with high security international standard ISO 17712:2013 and specifically with the requirement of having the internal metal part exceeding 18 mm. The patent pending innovative mechanical design is characterised by two metal tabs attached to the bolt, which securely slot into the locking channel, thus preventing any breaching by high speed spinning of the female part of the seal. Any tampering attempt will give evidence of irreparable damage onto the bolt lock seal.

NEEDED CERTIFICATES TO BE IN GOOD STANDING WITH THE USE OF HIGH SECURITY SEALS COMPLIANT WITH ISO 17712: 2013

TECHNICAL DRAWING

SIZE
Length: 73.5 mm (2″ 57/64″)
Diam (head): 20 mm (25/32″)
Diam (pin): 8 mm (5/16″)

MATERIAL
Metal parts: Carbonitrided steel
Plastic parts: Polystyrene with pigment paint compliant with safety requirement of RoHS – Restriction of Hazardous Substances, European Directive 2002/EC.

COLORS & CUSTOMIZATIONS
(Photos and drawings are indicative.)

MARKING OPTIONS
– Laser etching
– Sequential numbering up to 15 digits
– Barcode
– Data Matrix
– RFID option
– Customised printing up to 20 alphanumeric characters on one single line
– Client logo printing or embossing on request

PACKAGING
250 pcs per carton
Carton size: 39×19×16 cm (15″ 23/64″×7″ 31/64″×6″ 19/64″)
Carton weight: 13,3 kg (29 lb)

The post High security container bolt seal NEPTUNE SEAL appeared first on LeghornGroup.

RFID TAMPER EVIDENCE e- SEAL is the step ahead in front of already existing RFID seals.
RFID NEPTUNE SEAL TAMPER EVIDENCE main features:
– Certified in compliance with requirements as per ISO 17712:2013 High Security Seal
– It can be read quickly and accurately by static gateway reading systems or by handheld devices assigned to check point personnel.
– Any tampering event occurring with the e-seal is stored in its chip memory. This activates the – TAG TAMPER ALARM, which provides the status of the seal at readings (tampered/not tampered, i.e. breached or intact seal);
– In the event of tampering, the e-seal irreversibly changes its electronic status. The TAMPER status is automatically flagged up when reading is taken.
– The RFID chip can also store additional information. The chip can be written by  using the RFID reader/writer device. Further information added and the chip itself can be password protected.

The key pieces of information that the seal provides are:
– RFID e-seal serial number
– Date and time when the reading is taken
– Number of readings taken for each RFID e-seal
– Registration sequence in the event of having two or more RFID e-seals on two containers on the same trailer
– Status of the  seal (TAMPERED / NOT TAMPERED)

TECHNICAL SPECIFICATION

Radio Frequency specification
Frequency …………………………………………… 860 – 960 MHz – UHF EPC Global
Reference RF Standard ……………………….. ISO/IEC 18000-63
RF Protocol …………………………………………. EPC Class 1 Gen2 / ISO/IEC 18000-63
Technology …………………………………………. Passive
Integrated circuit ………………………………… NXP

Mechanical specification
IP Protection ………………………………………. IP66
Operative Temperature ……………………… – 30°C / + 80 °C
Storage Temperature …………………………. – 30°C / + 80 °C
ISO 17712:2013 …………………………………… Yes

Electronic specification
Reading distance handheld reader ……… 3 m (118” 7/64”) (depending on the reader)
Reading distance gate reader ……………… 8 m (314” 61/64”) (depending on the reader)
Quality ………………………………………………… 100% performance tested
User read / write memory …………………… Yes
Read / write cycle ………………………………… 10000
Memory size ……………………………………….. 128 bit from chip NXP G2iL+
Password protection ……………………………. Yes
Tamper Detection ……………………………….. Yes
TID (tag unique identification) ……………… Yes
S/N in memory (same of seal) ………………. Yes
Data retention ……………………………………… 20 year
Integration with handheld reader ………… commercial reader, OS ANDROID
Integration with gate reader ………………… commercial industrial reader

TECHNICAL DRAWING

SIZE
Metallic pin
Diameter: 8 mm (5/16”)
Length: 74 mm (2” 29/32”)

Bolt size
Diameter: 22 mm (55/64”)

Electronic Part (flag): 42×115×4 mm (1” 21/32”×4” 17/32”×5/32”)
Weight: 70 gr (0.15 lb)

MATERIAL
Steel + ABS  o polystyrene per Restriction of Hazardous Substances (RoHS) listed in the European Directive 2002/EC.

COLORS & CUSTOMIZATIONS
(Photos and drawings are indicative.)

PACKING
50 pcs per carton
Carton size: 32×25×15 cm (12” 19/32”×9” 27/32”×5” 29/32”)
Carton weight: 5 kg (11 lb)

* LOGISTIC VERSION (ID only) AVAILABLE ON REQUEST

The post High security UHF RFID bolt seal NEPTUNE SEAL appeared first on LeghornGroup.

LEGHORN’s management team, aware of the importance of investing in projects that include electronic technology  have spent the last 10 years developing and expanding their current range of products. The latest products manufactured in house combine the traditional methods of mechanical tamper prevention with the most modern usage of RFID technology.

LEGHORN is proud to present their first single use active Rfid seal.

MENTORSEAL is an innovative seal that combines the high security of an ISO 17712:2013 approved seal, with the technical features of an active device that uses Radio frequency to automatically identify the container and/or vehicle.

The primary security  function of the seal is integrated with the possibility of improving the logistics  flow by keeping track of the container.

MENTORSEAL can be read with  static gateway readers of handheld portable readers, that are equipped with the relevant reading module of the seal- operating on a double frequency 433 MHz -2.45 GHz.

Thanks to the presence of active RFID , the seal can communicate over significant distances (e.g. over 15m).

The seal is characterised by it’s own unique Identification code. Furthermore as it is a single use seal its pricing is extremely competitive.

Some of the main innovative features of  MENTORSEAL are:

• Guaranteeduniquenessof the coupling betweenthe head of theseal with thepinand barrel
• Timestamp of when the seal is “born” stored in the memory;
• Timestamp of when the seal is closed stored in the memory;
• Timestamp of  the opening /or tampering of the seal stored in the memory.

DATA COMMUNICAITON: Any data received from MENTORSEAL using a hand held reader can be downloaded to a server whilst offline or alternatively online using WiFi or GPRS; If working with a fixed reader it can be connected to a PC via an Erthernet communication interface.

TRACEABILITY:  MENTORSEAL can store in its memory 15 Log  and the container ID.
This allows the user the trace the logistics flow of the container using the information received.

READING DISTANCE: MENTORSEAL  can be read at a distance of over 15 m by way of  “Contact reading” or “in line of sight”, allowing the reading to be taken whilst the container is in transit and speed up the security operations.

MENTORSEAL HAS BEEN MANUFACTURED AROUND THE INTERNAL MECHANICAL COMPONENTS OF NEPTUNESEAL ISO 17712:2013

TECHNICAL DRAWING

COLORS & CUSTOMIZATIONS

The post MENTORSEAL Active Seal appeared first on LeghornGroup.