NEPTUNE UHF RFID LOGISTIC SEAL has read-only univocal ID; additional user memory is available for the storage of customer-specific information.

The outer ABS plastic housing of the seal – customizable  with mark and numbering on request – embeds an unique electronic RFID chip that has its own univocal coding, which cannot be replicated.  This allows for secure and reliable automatic identification of the seal  applied to the container.

RFID provides automatic  identification of the  container: NEPTUNE UHF RFID LOGISTIC SEAL can be automatically  detected when  trucks/containers are on-the-go at gateways, by using RFID gates. It can be read quickly and  accurately by static  gateway reading systems, which makes gate in/gate  out operations faster and more reliable and  secure (human error  free).

If needed it also can be read/written by handheld devices operated by check point  personnel.

The RFID chip can also  be used to store further information added and the chip itself, which  can be even password  protected.

The chip can  be easily written by using any commercial  RFID reader/writer device compliant with international standard ISO18000-6C.

This seal is available also in tamper evidence version: the status of the  seal (TAMPERED / NOT TAMPERED) is immediately detected and read at  time of passing through gate or by  manual inspection.

TECHNICAL DRAWING

SIZE
Metallic pin
Diameter: 8 mm (5/16”)
Length: 74 mm (2” 29/32”)

Bolt size
Diameter: 22 mm (55/64”)

Electronic Part (flag): 42×115×4 mm (1” 21/32”×4” 17/32”×5/32”)
Weight: 70 gr (0.15 lb)

Radio Frequency specification
Frequency: 860 – 960 MHz – UHF EPC Global
Reference RF Standard: ISO/IEC 18000-6
RF Protocol: EPC Class 1 Gen2 / ISO/IEC 18000-63
Technology: Passive
Integrated circuit: NXP G2iM+
User read / write memory: yes – up to 640 bit
Memory size: from 128 bit up to 448 bit of EPC Memory
TID (Tag IDentifier): 96 bit, including 48-bit factory locked
Unique serial number: 112 bit User TID memory
Password protection: yes
Tamper Detection: no
Read / write cycle: 10000
Data retention: 20 year

Performance
Reading distance by handheld reader: 3 m (118” 7⁄64”) (depending on reader)
Reading distance at gate reader: 8 m (314” 61⁄64”) (depending on reader)
Quality: 100% performance tested

Mechanical specification
IP Protection: IP66
Operative Temperature: 20°C/ +55°C
Storage Temperature: – 30°C / +80°C
ISO 17712:2013: yes
Size Electronic Part (flag): mm 42 x 115 x 4 (1” 21⁄32” x 4” 17⁄32” x 5⁄32”)
Metallic pin diameter: 8 mm (5⁄16”)
Metallic pin length: 73.5 mm (2” 29⁄32”)
Bolt diameter: 20 mm (55⁄64”)
Weight: 70 g
Material: carbonitrured steel + ABS in accordance with Restriction of Hazardous Substances (RoHS), European Directive 2002/EC

The post NEPTUNE UHF RFID LOGISTIC SEAL appeared first on LeghornGroup.

• Compliant with ISO 17712:2013 as high security seal
• The peel-off sticker is made of paper with thermal transfer ribbon printed for an accurate number transfer
• Tensile strength: >1000 kg
• Working temperature: -40°c +80°c

TECHNICAL DESIGN

SIZE
Length: 82 mm
Diam (head): 21 mm
Diam (pin): 8 mm; 9.7 mm; 11 mm

MATERIAL
Carbon steel pin and polystyrene/ABS coated locking body

AVAILABLE COLORS
Available colours: white, yellow, red and green
Further colours as pink, grey and brown can be manufactured upon request.

SEQUENTIAL NUMBERING AND CUSTOMISATION
– Marking: laser
– Progressive numbering up to 15 digits
– Customisation up to 20 characters on one line
– Logo, barcode and data matrix upon request

PACKAGING
Box with 200 seals
Box size: 49x31x13cm

The post Bolt Lock High Security Seal With Peel-off Sticker CERBERUS SEAL appeared first on LeghornGroup.

TECHNICAL DRAWING

MEASUREMENTS
Width: 9.5mm
Length: 215mm

MATERIALS
Steel, tin-plated, white painted

COLORS & CUSTOMIZATIONS

NUMBERING AND CUSTOMIZATION
– Laser printing
– Consequential numbering up to 7 digits plus barcode
– Customization of up to 16 characters on one line
– The customer’s logo can be created on request

PACKAGING
Cardboard with 1000 seals divided into envelopes of 100 consecutively numbered seals
Cardboard dimensions: 39.5×29×20 cm
Cardboard weight: 8.5 kg

The post Metal strip seal BALLOON SEAL White appeared first on LeghornGroup.

It’s the first RFID bolt seal – compliant with ISO 17712 technical standards – available on the market that is able to provide its status information, UNLOCKED,  LOCKED OR TAMPERED, which is stored in the RFID chip. For this reason, the product has been named “three-state“.

The outer polypropylene plastic housing of the seal – customizable with mark and numbering on request – embeds an unique and latest generation of electronic chip, that has its own univocal coding, which cannot be replicated.

This allows for secure and reliable automatic identification of the seal applied to the container or vehicle.

TECHNICAL DRAWING

SOTER SEAL

• Has univocal ID code and read/write user memory capabilities.
• It offers at the same time the immediate and accurate seal identification and the status of the seal i.e. unlocked/locked and evidence of tamper occurred, if any.
• It is an ideal solution for guaranteeing cargo security and tamper evidence along the shipping and supply chain.

COLORS & CUSTOMIZATIONS
(Photos and drawings are indicative.)

RADIO FREQUENCY SPECIFICATION

• Frequency: 860 – 960 MHz
• Reference RF Standard: EPC Class 1 Gen2 / ISO/IEC 18000-6C
• Technology: Passive
• RFID IC: NXP G2iM+
• User read / write memory: up to 640 bit
• Memory size: from128 bit up to 448 bit of EPC memory
• TID (Tag IDentifier): 96 bit, including 48-bit of univocal progressive numbering factory locked; 112 bit user TID memory
• Password protected: yes
• Tamper detection: yes – THREE STATES DETECTION
• Read/Write cycle: 10000
• Data retention: 20 years

PERFORMANCE

• Reading distance by handheld reader: 2 m (6’6” 47/64”) (depending on reader)
• Reading distance at gate reader: 5 m (16′ 4″ 27/32”) (depending on reader)
• Quality: 100% performance tested)

MECHANICAL SPECIFICATION

• IP Protection: IP65
• Operating temperature: – 20°C / + 55°C
• Storage temperature: – 30°C / + 80°C
• ISO 17712:2013 Clauses 4, 5 and 6: yes
• Material: carbonitrured steel + polypropylene in accordance with Restriction of Hazardous Substances (RoHS), European Directive 2002/EC.

SIZE

• Electronic flag: 48×117×4 mm (1”x 7/8”×4” 19/32”×5/32”)
• Metallic pin length: 67 mm (2″5/8”)
• Metallic pin diameter: 8 mm ( 3/16”)
• Bolt size: 56×63×26 mm (2″ 13/64×2″ 31/64”×1″ 1/32”)
• Weight: 114 g

The post Bolt lock UHF RFID three-state e-seal SOTER SEAL appeared first on LeghornGroup.

TECHNICAL DRAWING

SIZE
Width: 17 mm (0″ 43/64″)
Length: 32,5 mm (open) (1″ 9/32″)
Length: 16 mm (closed) (0″ 5/8″)

MATERIAL
Aluminum
Can be produced on request also in galvanised metal

COLORS & CUSTOMIZATIONS

CUSTOMISATION AND NUMBERING
– Printing in relief
– Customisation up to 10 letters on one line
– Logo on request

PACKING
5000 pcs per carton
Carton size: 25x34x17 cm (9″ 27/32″ x 13″ 25/64″ x 6″ 11/16″)
Carton weight: 4 kgs (8lb)

The post Salcrimp appeared first on LeghornGroup.

SIZE

MATERIAL
– Brass plated steel
– Aluminium

MARKING OPTION
The can be customised in relief on metal

PACKAGING 

The post Eyelet seals for Documents appeared first on LeghornGroup.

TECHNICAL DRAWING

SIZE
– ART LHG 9099: Diam: 7 mm (0″ 9/32″) x Length: 4 mm (0″ 5/32″)
– ART LHG 9100: Diam: 9 mm(0″ 23/64″) x Length: 5 mm (0″ 13/64″)

MATERIAL
Aluminium

COLOURS

CUSTOMISATION
They can be customised on the metal in relief

PACKING
Quantity per carton: 100.000 pcs (minimum order quantity)
Carton Size: 32x16x24 cm (12″ 19/32″ x 6″ 19/64″ x 9″ 29/64″)
Carton weight: 5,32 kgs (11lb)

The post Eyelet seals for Dairy Products appeared first on LeghornGroup.

High Security Cable Seal ISO 17712 with 3,5 mm of cable diameter is the best trade-off between security degree and versatility of usage.

It is an adjustable seal and can be used in many different conditions, in particular in any application to protect cargos during shipping and intermodal freight.

CABLESEAL 3,5×250mm has the body completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

This is a High Security Seal compliant with requirements impose by ISO 17712:2013.

(*) Anodising is a non- spontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion.

TECHNICAL DRAWING

SIZE
Diameter: 3,5 mm (0″ 9/64″)
Length: 250 mm (9″ 27/32″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS
(Photos and drawings are indicative.)

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKING
500 pcs per carton
Carton size: 36×29×19 cm (14″ 11/64″ × 11″ 27/64″ × 7″ 31/64″)
Carton weight: 19.2 kg (42.3 lbs)

The post High Security Cable Seal 3.5×250 mm ISO 17712 appeared first on LeghornGroup.

Cable seals are metal adjustable seals and as such they are extremely versatile and can be used in a wide set of different applications.

Cable seals 4×250 mm have the body completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

Specifically CABLESEAL 4×250mm is suitable to meet security requirements in container shipping or rail transport.

This is a High Security Seal compliant with requirements impose by ISO 17712:2013.

(*) Anodising is a non- spontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion.

TECHNICAL DRAWING

SIZE
Diameter: 4 mm (0″ 5/32″)
Length: 250 mm (9″ 27/32″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS
(Photos and drawings are indicative.)

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKAGING
500 pcs per carton
Carton size: 39×29×19 cm (15″ 23/64″×11″ 27/64″×7″ 31/64″)
Carton weight: 19,6 kg (43 lb)

The post Cable seals 4×250 mm appeared first on LeghornGroup.

TECHNICAL DRAWING

SIZE
Diameter: 5 mm (0″ 13/64″)
Length: 250 mm (9″ 27/32″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS
(Photos and drawings are indicative.)

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKING
250 pcs per carton
Carton size: 40x30x18 cm (15″ 3/4″ x 11″ 13/16″ x 7″ 3/32″)
Carton weight: 17 kgs (37lb)

The post Cable Seal 5×250 mm appeared first on LeghornGroup.