TECHNICAL DATA

Performance

• CPU Octa-core, 2.0 GHz
• RAM+ROM
  • 3 GB + 32 GB
  • 4 GB + 64 GB (optional)
  • 6 GB + 128 GB (optional)
• Expansion Supports up to 256 GB Micro SD (TF) card

Communication

• WLAN Support 802.11 a/b/g/n/ac/ax-ready/d/e/h/i/k/r/v,2.4G/5G dual-band, IPV4, IPV6, 5G PA;
• Fast roaming: PMKID caching, 802.11r, OKC;
• Operating Channels: 2.4G(channel 1~13), 5G(channel36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,144,149,153,157,161,165),Depends on local regulations;
• Security and Encryption: WEP,WPA/WPA2-PSK(TKIP and AES),WAPI- PSK—EAP-TTLS,EAP-TLS, PEAP-MSCHAPv2, PEAP-LTS,PEAP-GTC, WPA3-Enterprise,etc.

• WWAN (Europe, Asia)
  • 2G: 850/900/1800/1900 MHz
  • 3G: CDMA EVDO: BC0
  • WCDMA: 850/900/1900/2100MHz
  • TD-SCDMA: A/F(B34/B39)
  • 4G: B1, B3, B5, B7, B8, B20, B38, B39, B40, B41
• WWAN (America)
  • 2G: 850/900/1800/1900 MHz
  • 3G: 850/900/1900/2100 MHz
  • 4G:B2/B4/B5/B7/B8/B12/B13/B17/B28A/B28B/B38
• Bluetooth Bluetooth 5.1
• Vo-LTE Support Vo-LTE HD video voice call
• GNSS GPS/AGPS, GLONASS, BeiDou, Galileo, internal antenna

Physical Characteristics

• Dimensions 160.0 x 76.0 x 15.5 mm / 6.3 x 2.99 x 0.61 in.
• Weight
  • 657 g / 23.17 oz. (with battery, UHF 1, UHF back clip);
  • 798 g / 28.15 oz. (with battery, UHF 2, C66+R6);
  • 297 g / 10.47 oz. (with battery, UHF 3, Built-in UHF)
• Display 5.5-inch high-definition full display (18:9) , IPS 1440 x 720
• Battery Removable main battery (normal version:4420 mAh ; with fingerprint / built-in UHF / volume measurement version: 5200mAh)
  • 5200 mAh optional pistol battery, support QC3.0 and RTC
  • Standby: up to 490 hours (only main battery ; WiFi: up to 470h; 4G: up to 440h)
  • Continuous use: over 12 hours (depending on user environment)
• Charging time: 2.5 hours (charge device by standard adaptor and USB cable)
• Touch Panel Multi-touch panel, gloves and wet hands supported
• Notification Sound, LED indicator, vibrator
• Interfaces USB Type-C, USB 3.1, OTG, extended thimble;
• Card slot 1 slot for Nano SIM card, 1 slot for Nano SIM or TF card
• Audio 2 microphones，1 for noise cancellation; 1 speaker; receiver
• Keypad 1 power key, 2 scan keys, 2 volume keys
• Sensors Accelerometer sensor, light sensor, proximity sensor, gravity sensor

Developing Environment

• Operating System Android 11/13; GMS, 90-day security updates, Android Enterprise, Zero-Touch, FOTA, Soti MobiControl, SafeUEM supported. Committed support for a future upgrade to Android 18 pending feasibility
• SDK Chainway Software Development Kit
• Language Java
• Tool Eclipse / Android Studio

User Environment

• Operating Temp. -20 ℃~+50 ℃
• Storage Temp. -40 ℃~+70 ℃
• Humidity 5% RH – 95% RH non condensing
• Drop Specification
  • Multiple 1.8 m / 5.91 ft. drops (at least 20 times) to the concrete across the operating temperature range;
  • Multiple 2.4 m / 7.87 ft. drops (at least 20 times) to the concrete after installed rubber boot
• Tumble Specification 1000 x 0.5 m / 1.64 ft. falls at room temperature
• Sealing IP65 per IEC sealing specifications
• ESD ±15 KV air discharge, ±8 KV conductive discharge

Data Collection

• Camera Rear 13 MP Autofocus with flash
• Facial Recognition lSO19794-5 Compatible

UHF

• Engine CM710-1 module based on Impinj E710
• Frequency 865-868 MHz / 920-925 MHz / 902-928 MHz
• Impinj Gen2X Supported
• Protocol EPC C1 GEN2 / ISO18000-6C, supports GS1 EPC Gen2v2 Authenticate and ISO/IEC 29167-11
• Antenna Circular Polarized Antenna (4dBi)
• Power
  • 1W (30dBm, +5 dBm to +30 dBm adjustable)
  • 2W Optional (33dBm, for Latin America, etc.)
• Max Read Range
  • 28m (Impinj MR6 tag, size 70 x 15mm)
  • 28m (Impinj M750 tag, size 70 x 15mm)
  • 32m (Alien H3 Anti-Metal tag, size 130 x 42mm)
• Fastest Read Rate 1300+ tags/sec
• Communication Mode Pin Connector

Ranges are measured in the open outdoors and low interference environment, and rate is measured in a laboratory low interference environment, they are affected by tags and environment.

NFC (Optional)

• Frequency 13.56 MHz
• Protocol ISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc.
• Chips M1 card (S50, S70), CPU card, NFC tags, etc.
• Range 2-4 cm

Barcode Scanning (Optional)

• 2D Scanner Zebra: SE4710 / SE2100; Honeywell: N6603; E3200; IA166S; CM60
• 1D Symbologies UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.
• 2D Symbologies PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX),etc.

Accessories

Separate handle with one button;
Handle + battery (handle battery 5200mAh, one button);
UHF back clip + handle (5200mAh, one button);
Wrist Strap; Rubber Bumper; Charging Cradle

The post Ultimate UHF RFID Reader – LGHC66 appeared first on LeghornGroup.

LGHC72 is a rugged Android-based UHF RFID reader boasting best-in-class UHF RFID capability. Equipped with an integrated Impinj E710 (supporting Impinj Gen2X), it enables a reading distance of over 30 m and excellent performance. The RFID reader features optional barcode scanning, an octa-core processor, and a high-power 8000 mAh battery to perfectly meet the needs of intensive applications, particularly in asset management, retail, warehousing, apparel inventory, highway tolls, fleet management, finance, etc.

TECHNICAL DATA

Performance

• Operating System Android 11/13; GMS, 90-day security updates, ZeroTouch, FOTA, Soti MobiControl, SafeUEM supported
• CPU Octa-core 2.3 GHz
• RAM+ROM 3GB + 32GB / 4GB + 64GB (optional)
• Expansion Supports up to 256GB Micro SD (TF) card

Communication

• WLAN IEEE802.11 a/b/g/n/ac, 2.4G/5G dual-band, internal antenna
• Bluetooth Bluetooth 5.0
• GNSS GPS/AGPS, GLONASS, BeiDou; internal antenna
• WWAN
  • 2G: GSM850/GSM900/DCS1800/PCS1900
  • 3G: WCDMA: B1/B2/B4/B5/B8 CDMA2000 EVDO: BC0 TD-SCDMA: A/F

• 4G:B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B20/B28A/B28B/B34/B38/B39/B40/B41

Physical Characteristics

• Dimensions 164.2 x 80.0 x 24.3 mm / 6.46 x 3.15 x 0.96 in.
• Weight 654 g / 23.07 oz.
• Display 5.2” IPS LTPS 1920 x 1080
• Touch Panel Corning Gorilla Glass, multi-touch panel, gloves and wet hands supported
• Power Li-ion, rechargeable, 8000 mAh
  • Standby: over 500 hours Continuous use: over 12 hours (depending on user environment)
  • Charging time: 3-4 hours (with standard adaptor and USB cable)
• Expansion Slot 1 slot for Nano SIM card, 1 slot for Nano SIM or TF card
• Interfaces USB 2.0 Type-C, OTG, Type-C headphones supported
• Sensors Light sensor, proximity sensor, gravity sensor
• Notification Sound, LED indicator
• Audio 1 microphone; 1 speaker; receiver
• Keypad 4 front keys, 1 power key, 2 scan keys, 1 multifunctional key

UHF

• Engine CM710-1 module based on Impinj E710
• Frequency 865-868 MHz / 920-925 MHz / 902-928 MHz
• Impinj Gen2X Supported
• Protocol EPC C1 GEN2 / ISO18000-6C
• Antenna Circular Polarized Antenna (4dBi)
• Power
  • 1W (30dBm, +5 dBm to +30 dBm adjustable)
  • 2W Optional (33dBm, for Latin America, etc.)
• Max Read Range
  • 26m (Impinj MR6 tag, size 70 x 15mm)
  • 28m (Impinj M750 tag, size 70 x 15mm)
  • 30m (Alien H3 Anti-Metal tag, size 130 x 42mm)
• Fastest Read Rate 1300+ tags/sec (circular polarization)

Ranges are measured in the open outdoors and low interference environment, and rate is measured in a laboratory low interference environment, they are affected by tags and environment.

NFC (Optional)

• Frequency 13.56 MHz
• Protocol ISO14443A/B, ISO15693, NFC-IP1, NFC-IP2, etc.
• Chips M1 card (S50, S70), CPU card, NFC tags, etc.
• Range 2-4 cm

Developing Environment

• SDK Chainway Software Development Kit
• Language Java
• Tool Eclipse / Android Studio

User Environment

• Operating Temp. -20 ℃~+50 ℃
• Storage Temp. -40 ℃~+70 ℃
• Humidity 5% RH – 95% RH non condensing
• Drop Specification Multiple 1.5 m / 4.9 ft. drops to the concrete across the operating temperature range
• Tumble Specification 1000 x 0.5 m / 1.64 ft. falls at room temperature
• Sealing IP65 per IEC sealing specifications
• ESD ±15 KV air discharge, ±6 KV conductive discharge

Data Collection

• Camera Rear 13 MP Autofocus with flash

Barcode Scanning (Optional)

• 1D Linear Scanner Honeywell: N4313
• 1D Symbologies UPC/EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS, etc.
• 2D Imager Scanner Zebra: SE4710 / SE4750SR / SE4750MR / SE4750DP; Honeywell: N6603; CM60
• 2D Symbologies PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX), etc.

Accessories

Standard AC Adaptor, USB Cable, etc. Optional Cradle, Holster, etc.

The post Android-based UHF RFID Reader – LGHC72 appeared first on LeghornGroup.

High-performance all-in-one UHF RFID reader. It integrates a UHF module based on the Impinj E710, supporting Impinj Gen2X and offering industry-leading UHF performance.

LGH-C5 features an integrated design, providing more stable UHF performance and greater durability.

The mobile computer’s advanced system configuration includes the Android 11/13 platform, an octa-core processor, optional large internal memory, and a high-capacity removable battery. It also supports 2D scanning, NFC, fingerprint recognition, and other functions, allowing for use in numerous sectors such as banking, public safety, warehousing, retail, logistics, and more.

TECHNICAL DATA

Performance

• CPU Octa-core, 2.3GHz
• RAM+ROM 3GB + 32GB / 4GB +64GB (Optional)
• Expansion Supports up to 256GB Micro SD (TF) card
• Operating System Android 11/13

Communication

• WLAN 802.11 a / b / g / n / ac, 2.4G / 5G dual-band
• WWAN
• 2G: GSM (B2 / B3 / B5 / B8)
• 3G: WCDMA (B1 / B2 / B4 / B5 / B8)
• CDMA2000 ECDO: BC0
• 4G: B1 / B2 / B3 / B4 / B5 / B7 / B8 / B12 / B17 / B20 / B28A / B28B / B38 / B39 / B40 / B41
• Bluetooth 5.0
• Vo-LTE Support
• GNSS GPS / AGPS, GLONASS, BeiDou, Galileo

Physical Characteristics

• Dimensions 177.0 x 80.2 x 14.8mm / 6.97 x 3.15 x 0.58in
• Weight 626g / 22.08oz. (device with battery)
• Display 5-inch (Fingerprint), 1280 x 720 / 6-inch, 2160 x 1080
• Touch Panel Multi-touch panel, gloves and wet hands supported; Corning Gorilla Glass
• Battery 6700mAh / 13400mAh removable pistol battery
• Built in 100mAh backup battery, supporting battery hot swap
• Card slot 2 slots for PSAM card (optional); 1 slot for Nano SIM card, 1 slot for Nano SIM or TF card
• Interfaces USB 2.0 Type-C, OTG, Type-C headphones supported
• Audio 1 microphone; 1 speakers; 1 receiver
• Notification Sound, LED indicator, vibrator
• Keypad 1 power key, 2 scan keys, 1 user-defined key, 2 volume keys (+/-)
• Sensor Gravity sensor, proximity sensor, light sensor, geomagnetic sensor (optional), gyroscope (optional)

Developing Environment

• SDK Software Development Kit
• Language Java
• Tool Eclipse / Android Studio

User Environment

• Operating Temp.-20 °C to 50 °C / 4 °F to 122 °F
• Storage Temp.-40 °C to 70 °C / -40 °F to 158 °F
• Humidity 5%RH to 95%RH (non condensing)
• Drop Specification Multiple 1.5m / 4.9ft. drops to the concrete across the operating temperature range
• Tumble Specification 1000 x 0.5m / 1.64 ft. falls at room temperature
• Sealing IP65 per IEC sealing specifications
• ESD ±15KV air discharge, ±8KV conductive discharge

Data Collection

• Camera Front camera 5MP Rear camera Rear 13MP Autofocus with flash

UHF

• Impinj Gen2X Supported
• Protocol EPCglobal Gen 2 (ISO18000-6C)
• Frequency 865-868MHz / 920-925MHz / 902-928MHz
• Engine CM710-1 module based on Impinj E710
• Output power 1W (30dBm, +5dBm to +30dBm adjustable) 2W Optional (33dBm, for Latin America, etc.)
• Antenna Circular polarization; 5dBi / 4dBi (NFC supported)
• Max Read Range
  • 5dBi
    • 30m (Impinj MR6 tag, size 70 x 15mm)
    • 32m (Impinj M750 tag, size 70 x 15mm)
    • 33m (Alien H3 Anti-Metal tag, size 130 x 42mm)
  • 4dBi
    • 22m (Impinj MR6 tag, size 70 x 15mm)
    • 26m (Impinj M750 tag, size 70 x 15mm)
    • 27m (Alien H3 Anti-Metal tag, size 130 x 42mm)
• Fastest Read Rate 1300+ tags / sec (Circular Polarized)

* Ranges and rates depend on tags and environment

Fingerprint (Optional)

• Sensor TLK1NC02
• Sensing Area (mm) 14.0 X 22.0
• Resolution (dpi) 508dpi, 256 greylevel
• Certifications FIPS 201, FBI
• Format Extraction ISO19794, WSQ, ANSI 378, JPEG2000
• Fake Finger Detection Support by SDK
• Security AES, DES key encryption of the host communication channel

NFC (Optional)

• Frequency 13.56MHz
• Protocol ISO14443A / B, ISO15693, NFC-IP1, NFC-IP2 etc.
• Chips M1 card (S50, S70), CPU card, NFC tags etc.
• Range 2-4cm

Barcode Scanning (Optional)

• 2D Scanner CM60; Zebra: SE4710
• 1D Symbologies UPC / EAN, Code128, Code39, Code93, Code11, Interleaved 2 of 5, Discrete 2 of 5, Chinese 2 of 5, Codabar, MSI, RSS etc.
• 2D Symbologies PDF417, MicroPDF417, Composite, RSS, TLC-39, Datamatrix, QR code, Micro QR code, Aztec, MaxiCode; Postal Codes: US PostNet, US Planet, UK Postal, Australian Postal, Japan Postal, Dutch Postal (KIX) etc.

Accessories

USB Cable, Adapter, Charging Cradle for device (optional), Charging Cradle for Pistol Battery (optional)

The post High-performance all-in-one UHF RFID reader – LGH-C5 appeared first on LeghornGroup.

LGHMR20 is a next-generation, refined wearable Bluetooth UHF reader compatible with the latest Impinj Gen2X technology. As a compact and portable device, it can be used with gloves, wristbands, or lanyards, making work much more flexible and practical.

Thanks to the integrated UHF module, the LGHMR20 offers a powerful data collection and transmission function via a simple Bluetooth connection with Android/iOS devices. The removable battery and fast charging allow for uninterrupted work over long periods. Additionally, this small device features protective characteristics such as being dustproof, waterproof, shockproof, and drop-resistant.

All these features make the LGHMR20 an extremely versatile device in a wide range of contexts, such as logistics and express delivery, retail store management, warehouse management, energy patrol inspections, asset management, e-commerce material picking, and ticket control, etc., helping users free their hands and significantly improve work efficiency.

TECHNICAL DATA

Physical Characteristics

• Dimensions 50 x 62 x 19mm / 1.97 x 2.44 x 0.75 in.
• Weight 64 g / 2.26 oz. (with glove: 90 g / 3.17 oz.)
• Power 1200 mAh (removable)
• Keypad ON/OFF, SCAN
• Indicator LED
  • Red indicator will be ON when charging;
  • Blue indicator will be ON when device has been fully charged;
  • Green indicator will be ON when battery is higher than 20%;
  • Green indicator will flash when battery is lower than 20%;
  • Bluetooth is not paired when bluetooth indicator is OFF;
  • Bluetooth is paired when bluetooth indicator is ON
• Colour: Yellow, Blue, Gray
• Port USB Type-C
• Charging Current 5 V / 1.5 A
• Charging Duration 1 hours

Communication

• Bluetooth Low Energy (BLE) 5.0
• USB Type C – USB connection for data transfer

Performance

• MCU Cortex-M3 72MHz

User Environment

• Operating Temp. -20 °C to +50 °C
• Storage Temp. -40 °C to +70 °C
• Humidity 5% RH – 95% RH non condensing
• Drop Specification 1.5 m dropping on concrete
• Sealing IP65

UHF RFID

• Engine CM-3N module based on Impinj E310
• Frequency 920-925 MHz / 902-928 MHz / 865-868 MHz
• Impinj Gen2X Supported
• Protocol EPC C1 GEN2 / ISO18000-6C
• Antenna Linear Polarized Antenna (-2.2dBi)
• Power 0.5W (27dBm, support +19-27dBm adjustable)
• Max Read Range 80 cm

Note *Range depends on tags and environment

Developing Environment

• SDK: Android / iOS SDK Supported
• Security: RFID Encrypted Module (reserve)

Accessories

• Hand wrap, wristband, lanyard, charging cradle for battery

The post Wearable UHF Bluetooth Reader – LGHMR20 appeared first on LeghornGroup.

Designed for operators on the move, LGH-SKID is ideal for inventory management, mobile workers, and service or maintenance applications. The reader is powered by the Impinj R2000 chipset, which enables high read speeds and reliable performance even in environments with a high density of readers and tags.

• Compatible with RAIN RFID (UHF EPC Class1 Gen2, ISO 18000-63)
• Available in ETSI and FCC versions
• Bluetooth communication
• Integrated circular polarization antenna
• Ergonomic design
• Battery powered
• Compatible with iPhone/iPad
• 3 mounting options: Magnetic, 3M Dual Lock™, SP-Connect™

TECHNICAL DATA

Frequency Range

• 865.600÷867.600 MHz (ETSI EN 302 208 V3.1.1) (Mod. R1280IE)
• 902÷928 MHz (FCC part 15.247) (Mod. R1280IU)
• 920.9 MHz ÷ 922.3 MHz (ARIB STD-T107) (Mod. R1280IJ)

RF Power

• Configurable from -2 dBm ERP to 22 dBm ERP (Mod. R1280IE)
• Configurable from -1.5 dBm EIRP to 24 dBm EIRP (Mod. R1280IU, R1280IJ)

Number of Channels

• 4 channels (compliant to ETSI EN 302 208 v. 3.1.1) (Mod. R1280IE)
• 50 hopping channels (compliant to FCC part 15.247) (Mod. R1280IU)
• 4 channels using 4 units radio channel (compliant to ARIB STD-T107) (Mod. R1280IJ)

Standard Compliance  EPC Class 1 Gen 2 – ISO18000-63

Antenna Gain 0.0 dBic (typical)

Antenna Polarization Integrated Circular Polarized Antenna

Read Range Up to 2.0 m (Typical)

USB Interface USB 2.0 Full Speed (12 Mbit/s) via USB Type-C connector

Bluetooth Interface

• Bluetooth 4.1 Smart Ready compliant
• 12dBm EIRP output power BR/EDR
• 8dBm EIRP output power BLE
• HID and Serial over GATT (BLE)
• HID and SPP profiles (Bluetooth classic)

User Interface

• Power and Trigger buttons
• Power and battery status LED
• Communication and operation result LED
• Bi-tonal buzzer and vibration element for event signalling

Battery Type Li-ion 3.7V, 1200mAh

Battery Life

• Operating: > 12h (with 40,000 tag readings)
• Standby: > 15 days (powered off, no LED blinking)

Battery Charging Time

• 3h connected to a PC USB port
• 2h 15min with 1A AC/DC power supply

IP Rating IP65

Dimensions

• 112 x 62 x 10/16 mm3
• 4.4 x 2.4 x 0.39/0.63 inches3

Length of USB cable 1.5 m

Operating Temperature -10°C to +55°C

Weight 110 g

The post UHF Reader with Bluetooth – LGH-SKID appeared first on LeghornGroup.

RFID TROLLEY has been specifically designed to work in harsh environment (industrial and outdoor) and with its robust IP65 stainless steel case and antennas it is the best work companion to carry out RFID reading operations in any operation area where fixed solutions are not possible or convenient.
RFID TROLLEY mounts adjustable high-performance antennas (up to four), which helps in finding the best placement to assure maximum reading efficiency and reliability.

RFID TROLLEY has wheels and handle that make very easy and light to move it across different areas, enabling RFID reading operations in modes and places that were not possible before, like for instance reading RFID seals on-the-go at harbour docks directly when loading-unloading containers into ships.

RFID TROLLEY comes together with a rugged tablet, Android OS, useful to set reader operation modes accordingly to different locations and to control data flow by operator. A suitable pocket is placed inside the trolley case to safely store the tablet when unused.

TECHNICAL DRAWING

MAIN TECHNICAL FEATURES– Top performing RFID UHF reader
– Two/Four adjustable external antennas
– Lights for feedback to operators
– Battery supplied with working endurance higher than eight hours
– Communication interfaces: Ethernet, GSM/GPRS
– Tablet with pre-installed SW for trolley set up, diagnostics, and maintenance.

RFID SPECIFICATIONS
– UHF Long Range Reader with GPRS
– EPC C1 G2, ISO 18000-6C Compliant
– Multi-Regional Support
– Embedded Intelligence
– Ethernet Port
– USB 2.0 High Speed Host Port
– Internal MicroSD slot
– Integrated GPRS modem (optional)

MECHANICAL SPECIFICATIONS
Metal cabinet size: cm 55 x 75 x 25 (21 ” 21/32” x 29” 17/32” x 9” 27/32”)
Overall Trolley size: cm 55 x 110 x 60 (21 ” 21/32” x 43” 5/16” x 23” 5/8”)
Antennas bar lenght: cm 150 (59” 1/16”)
Weight: kg 55 (121 lb)

The post RFID Trolley appeared first on LeghornGroup.

JANUS-GATE: RFID UHF GATE  is made up of a reader and two antenna that are capable of reading the RFID e-seals regardless of their position or condition, distinguishing even between two containers that pass through simultaneously in adjacent lanes.

1. RFID e-SEALS applied on the upper handles of the container
2. RFID e-SEALS applied on the lower handles of the container
3. RFID e-SEALS applied on the left or right hand side of the container
4. RFID e-SEALS applied to containers positioned  with the doors towards the lorry’s cab
5. RFID e-SEALS applied with the doors facing the opposite end  of the lorry’s cab

JANUS-GATE: UHF RFID  GATE

Is an RFID UHF  – ISO 18000-6 (EPC Global) able to read all types of RFID  seals (from any manufacturer).

For every lane  the JANUS-GATE: UHF RFID  GATE can read up to  2 RFID e-SEALS on the container that passes through it.

Every lane that must be checked  is managed by an  EPR FAST LANE STATION.

Main technical features

JANUS-GATE: UHF RFID  GATE

• Advanced Detection Algorithm , for the accurate and efficient reading of the seals that pass through the gate
• Lane Detection Firmware for identifying and reading of seals in adjacent lanes
• Auto setting capability, for improving the readings regardless of the environmental conditions
• Fast Mounting, for easy servicing set up and installation
• Fault Tolerance Management System , for 24 hour continuity and service operations (optional)

Main hardware Characteristics

“THE JANUS-GATE: RFID GATE PASSIVE SYSTEM UHF”

Management software: JANUS-GATE: RFID UHF  GATE

The  Management Software allows the RFID gates to be monitored and operated easily by the control staff. The main pieces of data that the system can manage are:

• serial number of theRFID e-seals
• identification of the gate
• identification of the lane
• date and time of the reading
• number and reading of each individualRFID e-seals
• sequential reading where a container is sealed with two e-seals or where there are two containers on the same trailer
• the state of the security seal (e.g. TAMPERED / NOT TAMPERED) valid for the containers fitted with the RFID NEPTUNE SEAL Anti tamper with special software .(optional)
• generation of file log

The Management Software for JANUS-GATE: RFID UHF GATE can be installed on any  PC or SERVER that uses WINDOWS.To connect the PC with the Management Software and  the  JANUS-GATE: RFID UHF GATE  a LAN network Ethernet TCP/IP connection is required .

The JANUS-GATE: RFID UHF GATE can also be integrated with existing IT systems and structures.

The post Janus Gate appeared first on LeghornGroup.