Twistseal

Completely plastic seal with or without incorporated sealing wire

Description

Completely plastic seal supplied both with and without sealing wire. The exterior part is made of transparent plastic for better controlling the locking mechanism. To secure rotate 360° the handle of the seal. Once closed, it is recommended to snap off the handle. It is impossible to tamper the seal once it is secured.

The following sealing wires are suitable for Twistseal:
– galvanised sealing wire
– stainless steel
– brass
– copper
– nylon copper

TECHNICAL DRAWING

MATERIAL
Polycarbonate
ABS

COLORS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request
– For special orders, logo printing in relief

PACKAGING
Plastic bags of 100 pcs in boxes of 2000 pcs each.
Size: 40x30x20 cm
Box weight: 7 kg

Examples of use

1. Examples of use on Trucks
2. Examples of use on Bottles
3. Examples of use on Counters

TRUCK:

1) The TWISTSEAL wire seal is particularly suitable for difficult closures. Insert the spiral wire into the closing hole of the truck…

2) Insert the same spiral wire in the second hole
Seal and turn the red lever several times …

3) In this way the sealing of the truck is obtained
Although it is designed with very small steps.
This wire seal is very robust and cannot be accidentally broken.

4) To remove the seal, just cut the spiral wire with a simple wire cutter.

BOTTLES:

1) The TWISTSEAL wire seal is particularly suitable for difficult closures. Insert the spiral wire into the hole of the bottle cap for sampling …

2) Then pass the same spiral wire through the hole
Located on the body of the bottle for sampling …

3) Insert the spiral wire into the free hole of the TWISTSEAL wire seal and turn the green lever several times. By doing so, the safe sealing of the bottle is obtained by sampling.

4) Different models of sampling bottles sealed with wire seals model TWISTSEAL.

COUNTERS:

1) The TWISTSEAL wire seal is particularly suitable for closings of water, electricity and gas meters. Insert the spiral wire into the appropriate hole in the recocordo …

2) Then pass the same spiral wire through the hole
Located on the body of the counter …

3) Insert the spiral wire into the free hole of the TWISTSEAL wire seal and turn the green lever several times. By doing this, the meter is sealed securely.