TECHNICAL DRAWING

PACKAGING
Box dimensions: 37 × 26 × 16 cm
Box of 2,000 seals
Box weight: 3 kg
Pallet: 80 × 120 × 210 cm – 200,000 seals

The post Fire Extinguisher Seal – Pelide Seal 1.6×125mm appeared first on LeghornGroup.

TECHNICAL DRAWING

SIZE
Length: 110 mm or
Length: 180 mm

PACKAGE
Article code: HT-5 Length 110 mm
Box of 10.000 units, packed in bags of 1000 units each.
Carton box size: 37 x 24 x 19 cm
Carton box weight: 1,8 kg

Article code: HT-7 Length 180 mm
Box of 10.000 units, packed in bags of 1000 units each.
Carton box size: 37 x 24 x 19 cm
Carton box weight: 1,9 kg

The post Seal for fire extinguishers Arachne Seal appeared first on LeghornGroup.

TECHNICAL DRAWING

COLOURS

(Other colours available on request)

PACKAGING
10.000 pcs per carton
carton size : 37 x 24 x 13 cm (14” 9/16” x 9” 29/64” x 5” 1/8”)
carton weigth: 2 kg (4 lb)

The post Uranus Seal appeared first on LeghornGroup.

TWIGGY SEAL is a adjustable length seal suitable for fire extinguishers and for those situations in which low tensile strength is required. The technicians of LeghornGroup have carefully adapt the tensile strength to provide a seal that gets easily broken. TWIGGY SEAL can be used to identify fire extinguisher or secure the emergency doors (longer version 250mm). It is made of recyclable plastic and its application is very quick and easy.

In an emergency situation, the seal, that is generally applied on the lever of the fire extinguisher, must be removed. For each technical and maintenance inspection TWIGGY SEAL needs to be removed for the fire extinguisher which it has been applied to.

TECHNICAL DRAWING

SIZE
Diameter: 2,2  mm (3/32”)
Length: 190 mm (7” 31/64”)
Label: 22 x 42 mm (55/64” x 1” 21/32”)

MATERIAL
Low density polyethylene

COLOURS & CUSTOMIZATIONS

MARKING
– Laser marking
– Sequentially numbering (max 15 digits)
– Barcode possibility
– Customisation up to 20 digits on a line
– Logo printing upon customer’s request
– For special orders embossed logo printing

PACKAGING
Cartons of 1.000 seals – in strips of 10 pcs
Carton dimensions: 30 x 24 x 22 cm (11” 13/16” x 9” 29/64” x 8” 21/32”)
Carton weight: 1.4 kg (3 lb)

The post Fire Extinguisher Seals TWIGGY SEAL 2.2×190 mm appeared first on LeghornGroup.

Each emergency exit needs to open outwards without being unlocked by any security officer. Fire Exit Door Security Seals has been studied to meet this requirement. With their low tensile strength, they are suitable for this application.

It is made of recyclable plastic and its application is very quick and easy. The technicians of LeghornGroup have carefully adapt the tensile strength to provide a seal that gets easily broken.

Fire Exit Door Security Seals as TWIGGY SEAL 250 are particular suitable for emergency doors since once force is applied to the doors, the seal gets IMMEDIATLY broken.

It must be taken into consideration that each public place must have emergency exits since in case of fire or earthquake people must easily be able to escape. Emergency doors must open outwards and can only be sealed with low tensile strength seals.

TECHNICAL DRAWING

SIZE
Diameter: 2,2  mm (3/32”)
Length: 250 mm (9” 27/32”)
Label: 22 x 42 mm (55/64” x 1” 21/32”)

MATERIAL
Low density polyethylene

COLOURS & CUSTOMIZATIONS

MARKING
– Laser marking
– Sequentially numbering (max 15 digits)
– Barcode possibility
– Customisation up to 20 digits on a line
– Logo printing upon customer’s request
– For special orders embossed logo printing

PACKAGING
Cartons of 1.000 seals – in strips of 10 pcs
Carton dimensions: 30 x 24 x 22 cm (11” 13/16” x 9” 29/64” x 8” 21/32”)
Carton weight: 1,4 kg (2.2 lb)

The post Fire Exit Door Security Seals TWIGGY SEAL 2.2×250 mm appeared first on LeghornGroup.

The idea of manufacturing plastic custom seals comes from the traditional custom lead seals.

Plombex may also be used with different type of sealing wires, metal core custom string or traditional string.

Plombex are properly sealed with a lead seal press.

They are mainly used to seal fire extinguishers or first aid kit but they may have a decorative function in the food and cosmetic industry.

Plombex are available in different colours including silver, gold and bronze

TECHNICAL DRAWING

SIZE
Diamenter: 9 mm (23/64″) or
Diamenter: 13 mm (33/64″)

MATERIAL

Polystyrene with colours in compliance with European Directive 2002/EC “Restriction of Hazardous Substances (RoHS)”.

Moreover LEGHORN products do not include any of the following substances: Cadmium, Lead, Mercury, Hexavalent chromium, Polybrominated biphenyls (PBB), Diphenyl

COLORS & CUSTOMIZATIONS

MARKING
Seals are marked while using the proper press for sealing them.
The press may be composed of customised moulds

LOGO EXAMPLES

PACKAGING

PLOMBEX 9MM (diam: 9 mm) (23/64″)
Cartons of 10.000 seals
Carton dimensions: 28 x 22 x 11 cm (11″ 1/32″ x 8″ 21/32″ x 4″ 21/64″)
Carton weight: 2,6 kgs (5.73 lb)

PLOMBEX 13MM (diam: 13 mm) (33/64″)
Cartons of 10.000 pcs
Carton dimensions: 37 x 25 x 19 cm (14″ 9/16″ x 9″ 27/32″ x 7″ 31/64″)
Carton weight: 6 kgs (12.34 lb)

The post Plastic custom seals Plombex appeared first on LeghornGroup.

VOID TAMPER EVIDENT LABEL of LeghornGroup is specifically designed to provide evidence of unauthorised tampering. LeghornGroup VOID LABEL can be applied both on smooth and rough surfaces. Once the Void tamper evident security label has been removed from the surface, it leaves a film behind showing a void/open message as evidence of tampering.

Numbering

These labels are supplied in different sizes and have all a progressive numbering.
The provide a high level of security by leaving a void message on the surface they have been applied to.
They can be used for different purposes that require a high level of security.

Where to apply labels

Void tamper evident security labels are widely used by hardware and mechanical objects manufacturers. In addition, also repair workshop and assistance laboratories use them. These labels have also a great importance for pharmaceutical industry, both for sealing special drug boxes and for laboratory test tubes.

In the transport field, these labels are used to seal boxes.
Void tamper evident labels are also used to ensure products authenticity.
An intact void security label guarantees that the product to which it has been applied to has not been tampered with.
It is also recommended to use a progressive numbering and note where the label has been applied to.

Examples of realisation

LeghornGroup can satisfy any customer’s requirement, from labels size, colours and shake. Void tamper evident security labels can be printed with logo, barcode and progressive numbering. LeghornGroup technicians are always at your disposal for any request concerning VOID security labels.

STANDARD SIZES
20×11 mm (25/32″×7/16″)
30×20 mm (1″ 3/16″×25/32)
40×20 mm (1″ 37/64×25/32″)
50×20 mm (1″ 31/32″×25/32″)
60×30 mm (2″ 23/64″×1″ 3/16″)
80×30 mm (3″ 5/32″×1″ 3/16″)
80×40 mm (3″ 5/32″×1″ 37/64″)
100×40 mm (3″ 15/16″×1″ 37/64)
120×50 mm (4″ 23/32″×1″ 31/32″)
150×75 mm (5″ 29/32″×2″ 61/64″)
200×80 mm (7″ 7/8″×3″ 5/32″)

MATERIAL
Paper
Polyetilene

SEQUENTIAL NUMBERING AND CUSTOMISATION
– INK PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Logos available upon request

The post Void tamper evident label with residue appeared first on LeghornGroup.

Ultra Destructible Tamper Evident Labels are a unique tamper proof security labels for excellent high bond adhesion and confirmability to smooth or curved irregular surfaces. When the destructible labels are tampered against removal and are easily damaged, causing cracking and cause multiple chipping effect in tits and bits leaving behind the evidence of tampering. LeghornGroup since forty years specialized in tamper prevention systems. Among security labels, ultra-destructible labels cover a very important role. They completely flake off when attempting to remove them from the surface which they are applied to.

We are able to manufacture also very small labels: a few millimeters of size or diameter.

Where to apply the labels

This type of labels is very much used by mobile and tablet repair and service centers, but are also used in the food, plumbing or banking sectors. We can produce them in sheets of any size, with any shaping on demand, or in reels.

Labels may be printed with bar code or a progressive numbering and they can also be manufactured by embedding RFID technology.
In this case, they would be named RFID ultra destructible labels.
The material used to produce ultra destructible labels is extremely fragile and breaks into hundreds of pieces if someone tries to remove them.
Ultra destructible labels are applicable on most surfaces.

Customisation

Choosing the right size and the right color for your labels means adding value to your brand.
An eye-catching logo, a clear message, and contacts well in sight: you will get a powerful tool to communicate with great effectiveness.
Your ultra destructible labels, together with providing you with tamper protection, will keep your company in the spotlight and let other customers get in touch with you.

However, LeghornGroup can offer in-house graphical service, to realize any kind of customers’ ideas.
With our experience in the field of counterfeiting, we will help you to choose carefully the material to create the most appropriate labels for your business.

Ultra destructible labels are tamper evident products that avoid discussions and misunderstandings. A small investment with a great return.

TECHNICAL DRAWING

STANDARD SIZES
20×11 mm (25/32″×7/16″)
30×20 mm (1″ 3/16″×25/32″)
40×20 mm (1″ 37/64″×25/32″)
50×20 mm (1″ 31/32″×25/32″)
60×30 mm (2″ 23/64″×1″ 3/16″)
80×30 mm (3″ 5/32″×1″ 3/16″)
80×40 mm (3″ 5/32″×1″ 37/64″)
100×40 mm (3″ 15/16″×1″ 37/64″)
120×50 mm (4″ 23/32″×1″ 31/32″)
150×75 mm (5″ 29/32″×2″ 61/64″)
200×80 mm (7″ 7/8″×3″ 5/32″)

MATERIAL
Paper
Polyetilene

COLOURS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– INK PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Logos available upon request

The post Ultra destructible tamper evident labels appeared first on LeghornGroup.

TECHNICAL DRAWING

SIZES
Width: 5 mm (0″ 13/64″)
Length: 37 mm (1″ 29/64″) open
Length: 19 mm (0″ 3/4″) closed

MATERIAL
Aluminium
Polished aluminium upon request

COLORS & CUSTOMIZATIONS

MARKING
– Possible engraving
– Sequentially numbering (max 6 digits)
– Customisation up to 10 digits on a line
– Logo upon request

PACKAGING
A) Carton with 5.000 pcs spare parts
B) Carton with 5.000 pcs. in bags of 1000 pcs
C) Carton with 10.000 pcs. Spare parts
D) Carton with 10.000 pcs. in bags of 1000 pcs
E) Carton with 5.000 pcs. in strips of 20 pcs

The post Aluminium seal with progressive numbering Crimpseal appeared first on LeghornGroup.