Real time alerting and recording of any access to the goods transported or stored: opening, closing or tampering (device ID, type of event, date and time).
It has a  long operation time thanks to its long-lasting battery, rechargeable via USB and easy to replace by the user.
GPS tracking for location, control, geofencing.

eLOCK GOLD is an advanced electronic reusable security lock, to control position and status of trucks and containers, either from fixed station or from mobile devices (smart phone and tablet).

eLOCK GOLD sends an SMS  alert any time the lock registers an event of opening/closure, tampering attempt (e.g. the cable is being cut), battery is low. Alert message includes ID, event type, GPS coordinates for the place the event took place at, and time stamp.

Designed as evolution of LeghornGroup e-LOCK GOLD product, which is on the market since more than 5 years, offers an improved user experience – in addition to the existing model ability to obtain logistic identification information in real time.

• Completely renewed plastic case to strengthen its resistance to mechanical shocks, dust and water (IP66 equivalent).
• Lithium battery, rechargeable via USB, of longer duration and replaceable by the user.
• Facilitated insertion of SIM card.
• Possibility to check the device functionalities thanks to the use of three front and multicoloured LEDs which report the user the battery status and GPS/GPRS communications.
• The employment of a last generation GPS module that allows to consistently reduce warm up periods and detect/track indoor positions (ex. in a warehouse).
• Possibility to download the recorded event log (more than 3500) from the device memory, throughout USB interface.
• Easier connection to PC.

How does eLOCK GOLD work?

Thanks to its advanced technical features, eLOCK GOLD can send an SMS to a set of selected numbers or communicate via web platform  if an event occurs and allows you to enable features of:

• MONITORING, thanks to its ability to communicate in real-time with IT systems for logistics and transport, it informs about the complete data on fleets and individual vehicles
• ANALYSIS of the data for the entire fleet relating to individual drivers, with the possibility of intervention and planning of activities..
• CONTROL, through real-time access to data on vehicles and drivers, and to the position marked on the map by using GPS tracking.

Used together a web-based èlatform for fleet tracking and management, it is a powerful tool to monitor vehicles and goods.

Technical specifications

• Dimension: 106,6×156,1×44,5 mm (4″ 13/64″×6″ 9/64″×1″ 3/4″)
• Material: High-resistant polycarbonate
• Power supply: 5 VDC
• Working voltage: 3,3 VDC
• Average current: 80 mA
• Current in standby mode: 15 uA
• Internal battery: 4,2 VDC 6600 mAh – Lithium battery, rechargeable via USB
• Working hours
• Two data per day: 4 years
• Ten data per day: 1 years
• Continuous every 10 minutes : 10 days
• Stand by > 10 years
• CPU Microcontroller System on Chip Cypress ARM Cortex-M3
• GSM GSM/GPRS module : Quectel M95
• Frequency band Quad-band: GSM850, EGSM900, DCS1800, PCS1900 MHz
• Antenna Internal antenna
• GPS Compact GNSS Module, U-blox SAM-M8Q-0-10 GPS + GLONASS
• Positioning accuracy: 2,5 m (8 ft)
• GPS sensitivity 165dBm@Tracking, -158dBm@Acquisition, -146dBm@ColdStart , -155dBm@HotStart
• Positioning time: Cold Start <26s; Hot Start <1s
• Satellite receiving channel: 72 channels
• Antenna embedded patch antenna
• LED indicator: for GSM / GPS status and battery charge
• Operating temperature: -15°C to 60°C
• Storage temperature: -20°C to 60°C
• Cable material insulated plastics, anti wringing, anti cutter
• Cable length: 75 cm (29″ 17/32″)
• Closure pin spring blocking system
• Security Possibility to block the system by using seals
• Log memory Last 3650 data recorded
• Data program /Data download/Firmware upgrade: via USB

 Information for customers to have access to our after-sales service and warranty conditions

The post Reusable electronic security seal eLOCK GOLD appeared first on LeghornGroup.

High Security Cable Seal ISO 17712 with 3,5 mm of cable diameter is the best trade-off between security degree and versatility of usage.

It is an adjustable seal and can be used in many different conditions, in particular in any application to protect cargos during shipping and intermodal freight.

CABLESEAL 3,5×250mm has the body completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

This is a High Security Seal compliant with requirements impose by ISO 17712:2013.

(*) Anodising is a non- spontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion.

TECHNICAL DRAWING

SIZE
Diameter: 3,5 mm (0″ 9/64″)
Length: 250 mm (9″ 27/32″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS
(Photos and drawings are indicative.)

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKING
500 pcs per carton
Carton size: 36×29×19 cm (14″ 11/64″ × 11″ 27/64″ × 7″ 31/64″)
Carton weight: 19.2 kg (42.3 lbs)

The post High Security Cable Seal 3.5×250 mm ISO 17712 appeared first on LeghornGroup.

Cable seals are metal adjustable seals and as such they are extremely versatile and can be used in a wide set of different applications.

Cable seals 4×250 mm have the body completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

Specifically CABLESEAL 4×250mm is suitable to meet security requirements in container shipping or rail transport.

This is a High Security Seal compliant with requirements impose by ISO 17712:2013.

(*) Anodising is a non- spontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion.

TECHNICAL DRAWING

SIZE
Diameter: 4 mm (0″ 5/32″)
Length: 250 mm (9″ 27/32″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS
(Photos and drawings are indicative.)

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKAGING
500 pcs per carton
Carton size: 39×29×19 cm (15″ 23/64″×11″ 27/64″×7″ 31/64″)
Carton weight: 19,6 kg (43 lb)

The post Cable seals 4×250 mm appeared first on LeghornGroup.

TECHNICAL DRAWING

SIZE
Diameter: 5 mm (0″ 13/64″)
Length: 250 mm (9″ 27/32″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS
(Photos and drawings are indicative.)

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKING
250 pcs per carton
Carton size: 40x30x18 cm (15″ 3/4″ x 11″ 13/16″ x 7″ 3/32″)
Carton weight: 17 kgs (37lb)

The post Cable Seal 5×250 mm appeared first on LeghornGroup.

With its cable diameter of 1 mm, it can be used in any locking situation. Particularly suitable to control counter meters of electricity, water and gas.

The body is completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

(*) Anodising is a non- spontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion.

TECHNICAL DRAWING

SIZE
Diameter: 1 mm (0″ 3/64″)
Lenght: 180 mm (7″ 3/32″)

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKAGING
1000 pcs per carton
Carton size: 30x28x15 cm (11″ 13/16″ x 11″ 1/32″ x 5″ 29/32″)
Carton weight: 8 kgs (17lb)

The post Cable Seal 1×180 mm appeared first on LeghornGroup.

It is particularly suitable to control counter meters of electricity, water and gas.

The body is completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

(*) Anodising is a non- spontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion.

TECHNICAL DRAWING

SIZE
Diameter: 1,5 mm (0″ 1/16″)
Lenght: 180 mm (7″ 3/32″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKAGING
500 pcs per carton
Carton size: 30x28x15 cm (11″ 13/16″ x 11″ 1/32″ x 5″ 29/32″)
Carton weight: 8,6 kg (18lb)

The post Cable Seal 1.5×180 mm appeared first on LeghornGroup.

It is particularly suitable to lock valves in the industry sector or trucks and oil tankers in transports.

The body is completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

(*) Anodising is a non- spontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion.

TECHNICAL DRAWING

SIZE
Diameter: 2,5 mm (0″ 3/32″)
Lenght: 200 mm (7″ 7/8″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKAGING
500 pcs per carton
Carton size: 30×28×15 cm (11″ 13/16″×11″ 1/32″×5″ 29/32″)
Carton weight: 9,5 kg (20 lb)

The post Cable seal 2.5×200 mm appeared first on LeghornGroup.

It is particularly suitable to lock trucks and oil tankers in transports.

The body is completely made in anodised aluminium (*) and a steel cable comes out of it.

Once inserted the opposite end of the cable into the hole, and pulled it to the maximum possible extent, there will be no way to open the seal unless by breaking it with good shears.

(*) Anodising is a non- spontaneous electrochemical process by which a protective oxide layer forms on the surface of the treated metal and protects it from corrosion.

TECHNICAL DRAWING

SIZE
Diameter: 3 mm (0″ 1/8″)
Lenght: 200 mm (7″ 7/8″)
Different size available on demand.

MATERIAL
The body: painted aluminium
Cable: steel wire – different diameters

COLORS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINTING
– Sequenced numbering up to 15 digits
– Also alphanumeric
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request

PACKAGING
500 pcs per carton
Carton size: 40x30x18 cm (15″ 3/4″ x 11″ 13/16″ x 7″ 3/32″)
Carton weight: 17,5 kg (38lb)

The post Cable Seal 3×200 mm appeared first on LeghornGroup.

TECHNICAL DRAWING

SIZE
Diameter: 3,7 mm (0″ 9/64″)
Lenght: 493 mm (19″ 13/32″)
Label: 22×69 mm (0″ 55/64″ x 2″ 23/32”)

MATERIAL
In accordance with : Restriction of Hazardous Substances (RoHS) listed in the European Directive 2002/EC.

COLOURS & CUSTOMIZATIONS

MARKING
– Thermal transfer
– Sequentially numbering (max 15 digits)
– Barcode possibility
– Customisation up to 20 digits on a line
– Logo printing upon customer’s request
– For special orders embossed logo printing

PACKAGING
Cartons of 1.000 seals – in strips of 10 pcs
Carton dimensions: 48 x 52 x 24 cm (1″ 57/64″ x 2″ 3/64″ x 0″ 15/16″)
Carton weight: 7,6 kg (16 lb)

The post Jupiter 3.7×493 mm appeared first on LeghornGroup.

TECHNICAL DRAWING

SIZE
Diameter: 2 mm (5/64”)
Length: 315 mm (12” 13/32”)
Label: 22×50 mm (55/64”×1” 21/32”)

MATERIAL
In accordance with: Restriction of Hazardous Substances (RoHS) listed in the European Directive 2002/EC.

COLOURS & CUSTOMIZATIONS

MARKING
– Thermal transfer
– Sequentially numbering (max 15 digits)
– Barcode possibility
– Customisation up to 20 digits on a line
– Logo printing upon customer’s request
– For special orders embossed logo printing

PACKAGING
Cartons of 1.000 seals – in strips of 10 pcs
Carton dimensions: 56×34×20 cm (22” 3/64”×13” 25/64”×7” 7/8”)
Carton weight: 3 kg (6,61 lb)

The post Pull-tight plastic seals JUPITER 2×315 mm appeared first on LeghornGroup.