Real time alerting and recording of any access to the goods transported or stored: opening, closing or tampering (device ID, type of event, date and time).
It has a  long operation time thanks to its long-lasting battery, rechargeable via USB and easy to replace by the user.
GPS tracking for location, control, geofencing.

eLOCK GOLD is an advanced electronic reusable security lock, to control position and status of trucks and containers, either from fixed station or from mobile devices (smart phone and tablet).

eLOCK GOLD sends an SMS  alert any time the lock registers an event of opening/closure, tampering attempt (e.g. the cable is being cut), battery is low. Alert message includes ID, event type, GPS coordinates for the place the event took place at, and time stamp.

Designed as evolution of LeghornGroup e-LOCK GOLD product, which is on the market since more than 5 years, offers an improved user experience – in addition to the existing model ability to obtain logistic identification information in real time.

• Completely renewed plastic case to strengthen its resistance to mechanical shocks, dust and water (IP66 equivalent).
• Lithium battery, rechargeable via USB, of longer duration and replaceable by the user.
• Facilitated insertion of SIM card.
• Possibility to check the device functionalities thanks to the use of three front and multicoloured LEDs which report the user the battery status and GPS/GPRS communications.
• The employment of a last generation GPS module that allows to consistently reduce warm up periods and detect/track indoor positions (ex. in a warehouse).
• Possibility to download the recorded event log (more than 3500) from the device memory, throughout USB interface.
• Easier connection to PC.

How does eLOCK GOLD work?

Thanks to its advanced technical features, eLOCK GOLD can send an SMS to a set of selected numbers or communicate via web platform  if an event occurs and allows you to enable features of:

• MONITORING, thanks to its ability to communicate in real-time with IT systems for logistics and transport, it informs about the complete data on fleets and individual vehicles
• ANALYSIS of the data for the entire fleet relating to individual drivers, with the possibility of intervention and planning of activities..
• CONTROL, through real-time access to data on vehicles and drivers, and to the position marked on the map by using GPS tracking.

Used together a web-based èlatform for fleet tracking and management, it is a powerful tool to monitor vehicles and goods.

Technical specifications

• Dimension: 106,6×156,1×44,5 mm (4″ 13/64″×6″ 9/64″×1″ 3/4″)
• Material: High-resistant polycarbonate
• Power supply: 5 VDC
• Working voltage: 3,3 VDC
• Average current: 80 mA
• Current in standby mode: 15 uA
• Internal battery: 4,2 VDC 6600 mAh – Lithium battery, rechargeable via USB
• Working hours
• Two data per day: 4 years
• Ten data per day: 1 years
• Continuous every 10 minutes : 10 days
• Stand by > 10 years
• CPU Microcontroller System on Chip Cypress ARM Cortex-M3
• GSM GSM/GPRS module : Quectel M95
• Frequency band Quad-band: GSM850, EGSM900, DCS1800, PCS1900 MHz
• Antenna Internal antenna
• GPS Compact GNSS Module, U-blox SAM-M8Q-0-10 GPS + GLONASS
• Positioning accuracy: 2,5 m (8 ft)
• GPS sensitivity 165dBm@Tracking, -158dBm@Acquisition, -146dBm@ColdStart , -155dBm@HotStart
• Positioning time: Cold Start <26s; Hot Start <1s
• Satellite receiving channel: 72 channels
• Antenna embedded patch antenna
• LED indicator: for GSM / GPS status and battery charge
• Operating temperature: -15°C to 60°C
• Storage temperature: -20°C to 60°C
• Cable material insulated plastics, anti wringing, anti cutter
• Cable length: 75 cm (29″ 17/32″)
• Closure pin spring blocking system
• Security Possibility to block the system by using seals
• Log memory Last 3650 data recorded
• Data program /Data download/Firmware upgrade: via USB

 Information for customers to have access to our after-sales service and warranty conditions

The post Reusable electronic security seal eLOCK GOLD appeared first on LeghornGroup.

It is always advisable to use security seals for drums or barrels, in particular during the transport of dangerous substances that must be carried out in compliance with ADR/RID/IMDG regulations.
As for plastic containers, polyethylene allows to obtain good containers for the transport of dangerous substances.
However, using a fixed length metal seals for drums helps to avoid further risks when handling the drum or the barrel.

We must pay close attention to polyethylene containers stacked and subjected to high temperatures: Any crushing and consequent falls of stacked barrels is a risk that should be taken into account.

Pay attention to the direct sunlight that attacks the molecular structure of polyethylene making it fragile. It is therefore suggested to use blue or dark colour drums or barrels. The stem/drum of this colour will be protected from ultra violet rays.

LeghornGroup manufactures security seals for drums and barrels in order to guarantee the highest level of security and any attempts at tampering.

LeghornGroup staff is always at your disposal for further information concerning seals for drums and barrels.

TECHNICAL DRAWING

SIZE
Width: 7 mm (0″ 9/32”)
Length: 100 mm (3” 15/16”)

MATERIAL
Steel

COLORS & CUSTOMIZATIONS

MARKING
– Hot print
– Sequentially numbering (max 6 digits)
– Customisation up to 20 digits on a line
– For special orders embossed logo printing

PACKAGING
Cartons of 1000 seals
Carton dimensions: 12 x 20 x 15 cm (4” 23/32” x 7” 7/8” x 0″ 19/32”)
Carton weight: 4 kg (8 lb)

The post Seals for drums and barrels FEBO SEAL appeared first on LeghornGroup.

TECHNICAL DRAWING

SIZE
Diameter: 5 mm (13/64”)
Length: 424 mm (16” 11/16”)
Label: 72 x 110 mm (2” 53/64” x 4” 21/64”)

MATERIAL
In accordance with : Restriction of Hazardous Substances (RoHS) listed in the European Directive 2002/EC

COLOURS & CUSTOMIZATIONS

MARKING
– Laser marking
– Sequentially numbering (max 15 digits)
– Barcode possibility
– Customisation up to 20 digits on a line
– Logo printing upon customer’s request
– For special orders embossed logo printing

PACKAGING
Cartons of 500 seals
Carton dimensions: 56 x 39 x 12 cm  (22” 3/64” x 15” 23/64” x 4” 23/32”)
Carton weight: 5 kg (11 lb)

The post Adjustable length plastic seals TITAN SEAL 5×424 mm appeared first on LeghornGroup.

TECHNICAL DRAWING

SIZE
Diameter: 5 mm (13/64”)
Length: 328 mm (12” 29/32”)
Label size: 72 x 110 mm (2” 53/64” x 4” 21/64”)

MATERIAL
In accordance with : Restriction of Hazardous Substances (RoHS) listed in the European Directive 2002/EC.

COLOURS & CUSTOMIZATIONS

MARKING
– Laser marking
– Sequentially numbering (max 15 digits)
– Barcode possibility
– Customisation up to 20 digits on a line
– Logo printing upon customer’s request
– For special orders embossed logo printing

PACKAGING
Cartons of 500 seals
Carton dimensions: 47 x 39 x 12 cm (18” 1/2” x 15” 23/64” x 4” 23/32”)
Carton weight: 6 kg (13 lb)

The post Adjustable length seal TITAN SEAL 5×328 mm appeared first on LeghornGroup.

TECHNICAL DRAWING

SIZE
Diameter: 3.3 mm (1/8”)
Length: 425 mm (16” 47/64”)
Label size: 22 x 50 mm (55/64” x 1” 21/32”)
Available also in the 3.3 x 315 mm version

MATERIAL
Polypropylene

COLOURS & CUSTOMIZATIONS

MARKING
– Thermal transfer
– Sequentially numbering (max 15 digits)
– Barcode possibility
– Customisation up to 20 digits on a line
– Logo printing upon customer’s request
– For special orders embossed logo printing

PACKAGING
Cartons of 1000 seals – in strips of 10 pieces
Carton dimensions: 56 x 33 x 24 cm (22” 3/64” x 12” 63/64” x 8” 21/32”)
Peso cartone: 5 kg (11 lb)

The post Adjustable length plastic seals ADJUST SEAL 3.3×425 mm appeared first on LeghornGroup.

The plastic enclosure of the seal, in robust ABS material, embeds an electronic chiptag  with unique code that not only enables the automatic identification of any container or transport vehicle, which the seal is attached onto, but enables also immediate, easy and reliable readings of the integrity status of the seal, by giving information about any tamper evidence.

RFID ANTITAMPER SEAL is the step ahead in front of already existing RFID SEAL

CABLE SEAL RFID ANTI-TAMPER:

• Is a High Security Seal;
• Univocally identifies the container or the vehicle to which it is attached;
• Can be easily and reliably read by fixed reading units placed at transit gates or by handheld reading units manually operated by inspectors and gives back it unique code as a basic RFID seal;
• When compared to standard RFID seals, tamper evident RFID seals are able to permanently store into their memory the tamper event by activating a status bit named TAG TAMPER ALARM, thus providing immediate information about seal status at readings (tampered/not tampered);
• Can store additional information but the ID code, also in password-protected mode, by using same devices that are used for the reading operation;

TECHNICAL DRAWING

COLORS & CUSTOMIZATIONS

* LOGISTIC VERSION AVAILABLE ON REQUEST

The post Security UHF RFID Cable seal – ANTI-TAMPER appeared first on LeghornGroup.

• RFID e-seal with unique serial number
• Can be automatically detected when goods or vehicles (trucks/trailers/containers) are  on-the-go at gateways, by using RFID gates: this makes gate in/gate out operations faster and more reliable and secure (human error free).

RFID TITAN SEAL

• Plastic adjustable seal for sacks, but also trucks, trailers, containers.
• RFID provides automatic identification of the item to which the seal is applied.
• It can be read quickly and accurately by static gateway reading systems or by handheld devices operated by check point personnel.
• The RFID chip can also be used to store further information. The chip can be easily written by using RFID reader/writer device.

TECHNICAL DRAWING

Radio Frequency specification

UHF Model

• Operating frequency: 860 – 960 MHz – UHF EPC Global
• Reference RF Standard: ISO/IEC 18000-6
• RF Protocol: EPCglobal and ISO 18000-63 compliant, Gen2V2 compliant
• Technology: Passive
• Integrated circuit: IMPINJ Monza 5 Read/Write
• User read / write memory: yes – 32 bit
• Memory size: up to 128 bits of EPC memory
• TID (Tag IDentifier): 48 bits of serialized TID
• Password protection: yes
• Tamper Detection: no
• Read / write cycle: 100,000
• Data retention: 50 years

HF Model

• Operating frequency: 13.56 MHz  – HF
• Reference RF Standard: ISO/IEC 15693
• Technology: Passive
• Integrated circuit: ICode SLI series
• Memory size: up to 2048 bit; Read/Write
• UID (Unique IDentifier): 64 bits
• Tag dimension: 60×60 mm (2” 23/64”×2” 23/64”)
• Password protection: yes
• Tamper Detection: no
• Read / write cycle: 10,000
• Data retention: 10 years

Performance

• UHF – Reading distance by handheld reader: 50 – 80 cm (19” 11/16” – 31” 1/2”)
• HF – Reading distance by handheld reader: 10 – 30 cm (3” 15/16” – 11” 13/16”)
• Quality: 100% performance tested

Mechanical specification

• IP Protection: IP66
• Operative Temperature: – 20°C / + 80°C
• Storage Temperature: – 20°C / + 80°C
• Size Electronic Part (flag): 72×110 mm (2” 53/64”×4” 21/64”)
• Total length: 424 mm (16” 11/16”)
• Working length: 308 mm (12” 1/8”)
• Weight: 11 g
• Material: co-polymer polypropylene plastic housing. PET RFID label with adhesive for special use.

Marking options

• Ink transfer printing
• Laser etching marking
• 15 digits sequential numbering
• Barcoding
• Up to 20 alphanumeric characters per line
• Customer’s logo
• Special customisation on quantities with embossed logo

COLOURS & CUSTOMIZATIONS

The post RFID TITAN SEAL appeared first on LeghornGroup.

LeghornGroup specialized in IMO and ADR hazardous goods labels and packaging solutions for dangerous goods transportation industry. We have a wide range of hazard warning diamonds (Haz-Chem Labels) which are typically available in 48 hours from the order.

These ADR and IMO adhesive hazard class labels include all classes of hazard and flammability, Environmentally Hazardous labels and those related to the danger to marine pollution according to IMDG regulations.

Dangerous goods are divided into nine hazard classes.
Hazard classes define the type of hazard associated with goods.
Many goods fall into more than one class of danger.

TECHNICAL DRAWING

Here below the classes of Hazard labels:

The International Maritime Dangerous Goods Code (IMDG Code) establishes the package applicable conditions for the safe transport of marine hazardous and polluting goods (including tanks/tank containers) and bulk solids.
Vehicles carrying dangerous goods on ferries (both international routes and in UK waters, e.g. to and from islands) must meet the requirements of the IMDG Code.

On the basis of the Un Orange Book Model Regulations, the IMDG Code is published by the International maritime Organisation (IMO) and is revised every two years.

EXAMPLES OF USE

Examples of hazard class labels

Once dangerous goods are transported via container by sea must have the correct hazard class label. The container must be labeled as required by the IMDG regulation for maritime transport.
Here below some useful examples of the correct labeling.

EXAMPLE 1

	Example 1 a Dangerous goods: Limited quantity. For Limited Quantity goods which are also dangerous for the environment, the mark of marine pollutant is no longer required.
	Example 1 b Dangerous goods: Container loaded with dangerous goods for the environment with UN number 3082 in quantities greater than 4000 kg of gross mass.
	Example 1 c Dangerous goods: Container loaded with class 1 goods For goods of class 1 the UN number is not required whatever the quantity transported.

EXAMPLE 2

	Example 2 a Dangerous goods: Container with goods belonging to the same class (in this example class 3) but with a different UN number Or goods with the same UN number but in quantities less than 4,000 kg.
	Example 2 b Dangerous goods: Container loaded with goods having the same UN number (in this example UN1266) but in quantities greater than 4000 kg of gross mass.
	Example 2 c Dangerous goods: Container loaded with goods having the same UN number (in this example UN1266) but in quantities greater than 4000 kg of gross mass.

EXAMPLE 3

	Example 3 a Dangerous goods: Containers with goods of different class, or with goods having a secondary risk. Here, for example with goods class 3, 8 and 9.
	Example 3 b Dangerous goods: Containers with Marine Pollutant goods that do not correspond to UN numbers 3077 and 3082. In this example the container contains organic peroxides dangerous for the environment.
	Example 3 c Dangerous goods: Container loaded with goods under fumigation. (UN number 3359).

In case you do not find the specific product for your needs, please contact us.
One of our experts will help you solve the problem.

The post Hazard class labels – ADR and IMO appeared first on LeghornGroup.

Ultra Destructible Tamper Evident Labels are a unique tamper proof security labels for excellent high bond adhesion and confirmability to smooth or curved irregular surfaces. When the destructible labels are tampered against removal and are easily damaged, causing cracking and cause multiple chipping effect in tits and bits leaving behind the evidence of tampering. LeghornGroup since forty years specialized in tamper prevention systems. Among security labels, ultra-destructible labels cover a very important role. They completely flake off when attempting to remove them from the surface which they are applied to.

We are able to manufacture also very small labels: a few millimeters of size or diameter.

Where to apply the labels

This type of labels is very much used by mobile and tablet repair and service centers, but are also used in the food, plumbing or banking sectors. We can produce them in sheets of any size, with any shaping on demand, or in reels.

Labels may be printed with bar code or a progressive numbering and they can also be manufactured by embedding RFID technology.
In this case, they would be named RFID ultra destructible labels.
The material used to produce ultra destructible labels is extremely fragile and breaks into hundreds of pieces if someone tries to remove them.
Ultra destructible labels are applicable on most surfaces.

Customisation

Choosing the right size and the right color for your labels means adding value to your brand.
An eye-catching logo, a clear message, and contacts well in sight: you will get a powerful tool to communicate with great effectiveness.
Your ultra destructible labels, together with providing you with tamper protection, will keep your company in the spotlight and let other customers get in touch with you.

However, LeghornGroup can offer in-house graphical service, to realize any kind of customers’ ideas.
With our experience in the field of counterfeiting, we will help you to choose carefully the material to create the most appropriate labels for your business.

Ultra destructible labels are tamper evident products that avoid discussions and misunderstandings. A small investment with a great return.

TECHNICAL DRAWING

STANDARD SIZES
20×11 mm (25/32″×7/16″)
30×20 mm (1″ 3/16″×25/32″)
40×20 mm (1″ 37/64″×25/32″)
50×20 mm (1″ 31/32″×25/32″)
60×30 mm (2″ 23/64″×1″ 3/16″)
80×30 mm (3″ 5/32″×1″ 3/16″)
80×40 mm (3″ 5/32″×1″ 37/64″)
100×40 mm (3″ 15/16″×1″ 37/64″)
120×50 mm (4″ 23/32″×1″ 31/32″)
150×75 mm (5″ 29/32″×2″ 61/64″)
200×80 mm (7″ 7/8″×3″ 5/32″)

MATERIAL
Paper
Polyetilene

COLOURS & CUSTOMIZATIONS

SEQUENTIAL NUMBERING AND CUSTOMISATION
– INK PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Logos available upon request

The post Ultra destructible tamper evident labels appeared first on LeghornGroup.

VOID TAMPER EVIDENT LABEL of LeghornGroup is specifically designed to provide evidence of unauthorised tampering. LeghornGroup VOID LABEL can be applied both on smooth and rough surfaces. Once the Void tamper evident security label has been removed from the surface, it leaves a film behind showing a void/open message as evidence of tampering.

Numbering

These labels are supplied in different sizes and have all a progressive numbering.
The provide a high level of security by leaving a void message on the surface they have been applied to.
They can be used for different purposes that require a high level of security.

Where to apply labels

Void tamper evident security labels are widely used by hardware and mechanical objects manufacturers. In addition, also repair workshop and assistance laboratories use them. These labels have also a great importance for pharmaceutical industry, both for sealing special drug boxes and for laboratory test tubes.

In the transport field, these labels are used to seal boxes.
Void tamper evident labels are also used to ensure products authenticity.
An intact void security label guarantees that the product to which it has been applied to has not been tampered with.
It is also recommended to use a progressive numbering and note where the label has been applied to.

Examples of realisation

LeghornGroup can satisfy any customer’s requirement, from labels size, colours and shake. Void tamper evident security labels can be printed with logo, barcode and progressive numbering. LeghornGroup technicians are always at your disposal for any request concerning VOID security labels.

STANDARD SIZES
20×11 mm (25/32″×7/16″)
30×20 mm (1″ 3/16″×25/32)
40×20 mm (1″ 37/64×25/32″)
50×20 mm (1″ 31/32″×25/32″)
60×30 mm (2″ 23/64″×1″ 3/16″)
80×30 mm (3″ 5/32″×1″ 3/16″)
80×40 mm (3″ 5/32″×1″ 37/64″)
100×40 mm (3″ 15/16″×1″ 37/64)
120×50 mm (4″ 23/32″×1″ 31/32″)
150×75 mm (5″ 29/32″×2″ 61/64″)
200×80 mm (7″ 7/8″×3″ 5/32″)

MATERIAL
Paper
Polyetilene

SEQUENTIAL NUMBERING AND CUSTOMISATION
– INK PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Logos available upon request

The post Void tamper evident label with residue appeared first on LeghornGroup.