LeghornGroup produces different models of seals for gas, water and electrical meters.
In particular, LeghornGroup was among the first companies to produce a self-locking wire seal more than 30 years ago. The evolution of the standard Twist seal is our Twistseal RFID UHF.

HOW TO USE IT
Insert the cable in one of the two holes on the body of the seal, paying attention to insert the same cable in the corresponding hole in the inner plastic cylinder.

To close it, turn the handle of the seal 360°. Once closed, it is advisable to snap off the handle. It is impossible to tamper the seal once it is secured.

TECHNICAL DRAWING

RFID UHF TWIST SEAL

Protocol: EPC Class 1 Gen2 ISO/IEC 18000-6C
Chip: ALIEN 9620
Memory: EEPROM
Operating frequency: 860 – 960 MHz  – UHF Global
Protection: IP65
Operating temperature: -20°C a +80°C
Storage temperature: -20°C a +80°C
Tag size: 15×30 mm
Resistance to critical external agents
Typical reading range: from 5 to 15 cm
(depending on the type of reader used)

Available also in the following  versions: RFID HF ISO 15693, HF ISO 14443A MIFARE, HF NFC NTAG

COLORS & CUSTOMIZATIONS
Red – Yellow – Blue – Green – White – Black – Orange – Light blue – Grey – Brown – Lilac – Silver – Gold

SEQUENTIAL NUMBERING AND CUSTOMISATION
– LASER PRINT
– Sequenced numbering up to 15 digits.
– Customised up to 20 characters on one line
– Logo available upon request
– Same EPC code than the outer laser marking
– Available in different RFID operating frequency

PACKING:
Quantity per carton 500 seals
Carton size: 56×24×46 H cm
Carton weight: 3/4 kg

The post UHF/HF/NFC RFID meter seal TWIST SEAL appeared first on LeghornGroup.

The seal has a special closing system with metal insert which strengthens its handling resistance. It can also be made with and without pre-cut.

HECTOR SEAL 7,5×424 mm meets a wide range of applications: it can be used to seal tank trucks, to close holes far from each other, or for heavy postal bags.

The presence of a unique RFID chip guarantees its complete non-clonability, reinforcing product security in the authentication of goods along the transport and logistics chain.

The availability of the product in two different operating frequency bands also ensures differentiated performances and therefore a wider possibility of use in the field.

The transparent housing covering the plastic head not only seals and makes the RF part inaccessible, but also allows a quick visual inspection and the reading at glance of any marking data printed in clear on the head itself.

TECHNICAL DRAWING

COLOURS & CUSTOMIZATIONS

TECHNICAL SPECIFICATIONS
Operative frequency: : 13.56 MHz – Protocol: ISO 14443A
RFID inlay type: HF Smart Label
RFID Chip: Ntag203, Ntag213
Reading Range HF/NFC: approx 3 cm

Operative frequency: : 860-960 MHz – Protocol: ISO 18000-6
RFID inlay type: UHF Smart Label
RFID Chip: Impinj Monza 5/Alien H3
Reading Range UHF: approx 10 cm

Plastic tag size: 76 mm*28 mm, Seal tail: Width 7.5 mm, Length 348 mm
Material: Polypropylene
Printing (option): Laser Mark
Barcode (option): Barcode printing
UID printing (option): Laser Mark

Operative Temperature: -20℃ ~ 55℃
Warranty: 1 year

The post UHF/HF/NFC RFID Pull-tight seal HECTOR SEAL appeared first on LeghornGroup.

This seal integrates an RFID inlay operating in the NFC HF band, Near Field Communication, with an electronic chip with a unique ID code.

The presence of the chip ensures the possibility of carrying out fast and reliable operations to identify the object to which the seal is applied (contactless and in the absence of line of sight).

Additional information can also be stored into the chip user memory, which can be accessed by simply placing any NFC smartphone or tablet in proximity of the seal.

TECHNICAL DRAWING

COLOURS & CUSTOMIZATIONS

TECHNICAL SPECIFICATIONS
RFID inlay type: HF Smart Label
Chip model: Ntag203, Ntag213
Operative frequency: 13.56 MHz – Protocol: ISO 14443A
Reading Range HF/NFC: approx 5 cm (1” 31/32”)
Operative Temperature: -20℃ ~ 55℃
Warranty: 1 year
Plastic tag size: 30 mm * 15 mm,
Seal tail: Dia. 3.3 mm, Length 265/374 mm (Dia. 1” 19/64”, Length 10” 7/16” / 14” 23/32”)
Material: Polypropylene
Printing (option): Laser mark
Barcode (option): Barcode printing
UID printing (option): Laser mark

The post Pull-tight seal UHF/HF/NFC RFID ADJUST SEAL appeared first on LeghornGroup.

This adjustable plastic seal. for fast and safe application, integrates a locking mechanism with metal locking to increase the level of protection against tampering attempts.

Also, it includes an electronic chip for univocal identification of the object to which the seal is applied (contactless and in the absence of line of sight).

Additional information can also be stored into the chip user memory, which can be accessed by simply placing any NFC smartphone or tablet in proximity of the seal.

TECHNICAL DRAWING

COLOURS & CUSTOMIZATIONS

TECHNICAL SPECIFICATIONS
RFID inlay type: HF Smart Label
Chip model: Ntag203, Ntag213
Operative frequency: 13.56MHz – Protocol: ISO 14443A
Reading Range HF/NFC: approx 5 cm
Operative Temperature: -20℃ ~ 55℃
Warranty: 1 year

Plastic tag size: 67 mm * 27 mm
Seal tail: Dia. 1.3/2.0/3.3 mm, Lunghezza 175/265/374 mm
Material: Polypropylene
Printing (option): Laser mark
Barcode (option): Barcode printing
UID printing (option): Laser mark

The post UHF/HF/NFC RFID Pull-tight seal JUPITER SEAL appeared first on LeghornGroup.

RFID CONNECTION LOCK is a protection system for fittings of water and gas supply, simple to apply, which operates as a seal; it is composed of two semi-circular parts which fit together in a permanent way – one inside the other – and that cannot be separated without prior split them. The transparent plastic material with which the seal is realized allows to check the correct closure of the valve.
The presence of an integrated RFID tag – available in the frequency band HF (NFC) and UHF, not accessible from outside, allows associating a unique serial number with the closure system CONNECTION LOCK, number that can be read remotely and without line of sight with the operator.
With this identifier, the meter is automatically identified, by using RFID handheld readers or even smartphones and tablet from the market, assuming use of NFC technology.

RFID CONNECTION LOCK mounts an RFID tag whose electronic chip has its own unique coding system and cannot be cloned. This feature enables a safe and reliable automatic identification of the seal, or meter / user associated with it.

The outer casing of the seal, made of high-impact resistant polycarbonate can be customized with marking and numbering (alphanumeric code with inkjet printing technique, laser engraving, or in quantity also embossed lettering).

TECHNICAL DRAWING

SIZE
ART 311: L: 26 mm R1: 16 mm R2: 22 mm; for DN20 (3/4”) pipe-fitting
ART 312: L: 30 mm R1: 16 mm R2: 24,5 mm; per DN20 (3/4”) bold pipe-fitting
ART 313: L: 28 mm R1: 19 mm R2: 27 mm; per DN25 (1”) pipe-fitting
ART 314: L: 38 mm R1: 29 mm R2: 39 mm; per DN40 (1” 1/2”) pipe-fitting

RFID HF / NFC OR RFID UHF SEAL FOR ENERGY METERS

• The RFID technology provides automatic, contactless and without line of sight identification of the seal associated with the meter.

• It can be read quickly and accurately through portable devices operated by the staff.

• The RFID chip can also be used to store additional information.

• One can easily write into the chip by using standard RFID read / write devices. The information can be password protected.

SPECIFICATIONS

Radiofrequency communication

• Frequency:        HF/NFC 13.56 MHz; UHF 860 – 960 MHz – UHF EPC Global
• RF Standard:    HF/NFC: ISO/IEC 15693; UHF: ISO/IEC 18000-6
• Technology:      Passive
• Tag:                  NXP ICODE series/NTAG213; NXP, Alien, Impinj.
• Read/Write User memory:          yes
• Password Protection:                yes
• Read/Write cycles:                    10000
• Data retention:                          20 years

Performance

• Reading Distance: with handheld reader up to 3 cm with NFC, up to 5 cm with HF, up to 20 cm with UHF (dependig on type of reader)
• Quality: 100% performance tested

Mechanical specifications

COLOURS

The post Meter Seal UHF/HF/NFC RFID CONNECTION LOCK appeared first on LeghornGroup.

• RFID e-seal with unique serial number
• Can be automatically detected when goods or vehicles (trucks/trailers/containers) are  on-the-go at gateways, by using RFID gates: this makes gate in/gate out operations faster and more reliable and secure (human error free).

RFID TITAN SEAL

• Plastic adjustable seal for sacks, but also trucks, trailers, containers.
• RFID provides automatic identification of the item to which the seal is applied.
• It can be read quickly and accurately by static gateway reading systems or by handheld devices operated by check point personnel.
• The RFID chip can also be used to store further information. The chip can be easily written by using RFID reader/writer device.

TECHNICAL DRAWING

Radio Frequency specification

UHF Model

• Operating frequency: 860 – 960 MHz – UHF EPC Global
• Reference RF Standard: ISO/IEC 18000-6
• RF Protocol: EPCglobal and ISO 18000-63 compliant, Gen2V2 compliant
• Technology: Passive
• Integrated circuit: IMPINJ Monza 5 Read/Write
• User read / write memory: yes – 32 bit
• Memory size: up to 128 bits of EPC memory
• TID (Tag IDentifier): 48 bits of serialized TID
• Password protection: yes
• Tamper Detection: no
• Read / write cycle: 100,000
• Data retention: 50 years

HF Model

• Operating frequency: 13.56 MHz  – HF
• Reference RF Standard: ISO/IEC 15693
• Technology: Passive
• Integrated circuit: ICode SLI series
• Memory size: up to 2048 bit; Read/Write
• UID (Unique IDentifier): 64 bits
• Tag dimension: 60×60 mm (2” 23/64”×2” 23/64”)
• Password protection: yes
• Tamper Detection: no
• Read / write cycle: 10,000
• Data retention: 10 years

Performance

• UHF – Reading distance by handheld reader: 50 – 80 cm (19” 11/16” – 31” 1/2”)
• HF – Reading distance by handheld reader: 10 – 30 cm (3” 15/16” – 11” 13/16”)
• Quality: 100% performance tested

Mechanical specification

• IP Protection: IP66
• Operative Temperature: – 20°C / + 80°C
• Storage Temperature: – 20°C / + 80°C
• Size Electronic Part (flag): 72×110 mm (2” 53/64”×4” 21/64”)
• Total length: 424 mm (16” 11/16”)
• Working length: 308 mm (12” 1/8”)
• Weight: 11 g
• Material: co-polymer polypropylene plastic housing. PET RFID label with adhesive for special use.

Marking options

• Ink transfer printing
• Laser etching marking
• 15 digits sequential numbering
• Barcoding
• Up to 20 alphanumeric characters per line
• Customer’s logo
• Special customisation on quantities with embossed logo

COLOURS & CUSTOMIZATIONS

The post RFID TITAN SEAL appeared first on LeghornGroup.

RFID Tags LGT10003 for Pallet

RFID Tags for Pallet LeghornGroup, in collaboration with its partners, has designed RFID tags for pallet that can be used in harsh environmental conditions. These tags are suitable for outdoor use and resistant to dust and other elements.

Their robust structure makes them ideal for applications such as industrial equipment monitoring, production and automation processes, and the management and tracking of wooden or plastic pallets, as well as large wooden or plastic containers.

Available in various shapes, sizes, and materials, LeghornGroup’s RFID tags for pallet offer multiple mounting options including screw, nails, adhesive backing, and more.

Specifically, our RFID tags for pallet provide a suitable option for any application on plastic, wood, and even cardboard. They are built to withstand harsh conditions such as high temperatures, humidity, and physical impact, ensuring consistent and reliable performance with a long service life.

TECHNICAL DRAWING

SIZE
– Thickness: 4 mm (5/32”)
– Label: 30 x 65 mm (1” 3/16” x 2” 9/16”)

MATERIAL
In accordance with: Restriction of Hazardous Substances (RoHS) listed in the European Directive 2002/EC.

MARKING OPTIONS
– LASER PRINT
– Sequenced numbering up to 15 digits
– Bar-code possibility
– Customised up to 20 characters on one line
– Logos available upon request
– For special orders, logo printing in relief

The post RFID Tags LGT10003 for Pallet appeared first on LeghornGroup.

After having inserted the cable in the appropriate holes, the anchor head crushes it, forming a “U”.
This system allows the seal to be used only once.

An additional guarantee is given by the unique and unrepeatable number that has been inserted in the memory of the RFID chip. Moreover, other information such as the name of the user and the name of the Inspector can be inserted into the TAG memory who carries out the check.
On request we can insert NFC tags that can also be read by a normal smartphone.

Suitable for:

• Water meters
• Gas meters
• Electrical meters

UHF
– RF protocol: EPC Class 1 Gen2 – ISO/IEC 18000-6C
– Integrated Circuit(IC): IMPINJ Monza 3 ; Read/Write
– Memory: EEPROM
– Operating  Frequency: 860 – 960 MHz  – UHF Global
– Protection: IP66
– Operating temp: -20°C to +80°C
– Storage temp: -20°C to +80°C
– Tag dimension: 12 x 30 mm
– Resistance harsh factory environment
– Reading distance: Typical reading  with  handheld reader: 5 – 15 cm

TECHNICAL DRAWING

MATERIAL
Polycarbonate
Polystirene

COLORS & CUSTOMIZATIONS

MARKING OPTIONS
– LASER PRINT
– Sequenced numbering up to 15 digits
– Customised up to 20 characters on one line
– Logos available upon request
– For special orders, logo printing in relief

PACKAGING
4.000 seals per carton
carton size: 56 x 24 x 46 cm (22” 3/64” x 9” 29/64” x 18” 7/64”)
carton weigth: 12 kg (26 lb)

The post UHF/HF/NFC RFID Meter Seal ANCHORFLAG appeared first on LeghornGroup.