Self locking TRITON seals for gas and water meters

Description

Self locking TRITON seals for gas and water meters

Self locking wire seals that can be used with different sealing wires: galvanized, steel, brass and copper.

Self locking Triton seal is a wire seal that can be used in a variety of applications. Once the sealing wire is inserted in the appropriate holes, push down the “guillotine mechanism” to lock the seal.
The sealing wire used for seals cannot be pulled out again and any tampering attempts will turn out to be evident.

Triton seal is usually designed for gas and water meters but it can also be used to seal tanks or for the refinery sector.
This wire seal may be used with any types of sealing wire : galvanized, stainless steel, brass or copper. The sealing wire is generally supplied separately from the seal. Therefore, it can be purchased both in reels and in pre-cut parts.

On one side there will be the customization of the seal, while on the other one a sequential numbering is engraved.
For this model customization is both in hot print and laser marking.

 

TECHNICAL DRAWING

 

SIZE
Width: 9 mm (23/64″)
Length: 13 mm (33/64″)
Heght: 27 mm (1″ 1/16″)

 

MATERIAL
ABS
POM (acetal)

 

COLORS & CUSTOMIZATIONS

 

SEQUENTIAL NUMBERING AND CUSTOMISATION
– HOT PRINT
– Progressive numbering up to 7 digits
– Customisation up to 20 characters on one line
– Logo available upon request

 

PACKAGING
1000 pcs per carton
Carton size: 56x33x24 cm (22″ 3/64″ x 12″ 63/64″ x 9″ 29/64″)
Cartone weight: 5 kgs (11lb)